Quick answer: metal roof cost = roof area × your installed price per sq ft, plus tear-off. A 40 × 28 ft house with 1 ft overhangs and a 6/12 roof has 1,260 × 1.118 = 1,409 sq ft of roof (14.09 squares). At an example $10 per sq ft, that is $14,087.

How to use the metal roof cost calculator
The calculator has three ways in, so you can use what you know about the roof.
- House length × width. Type the building length along the ridge, the width (the span) and the overhang. Pick gable, hip or shed. This mode also gives panels and trim lengths.
- Footprint area. Type the area the roof covers on plan. For a one-storey house this is about the floor area plus the overhangs. For a two-storey house, use the ground floor only.
- Measured roof area. If a roofer or a satellite report gave you the roof area, type it straight in.
- Pick how you know the roof size and type it in.
- Set the pitch, as rise per 12 or in degrees.
- Type your metal roof price and say whether it is installed or material only.
- Choose the old layers to tear off and type the removal price.
- Open “Panels, trim and fasteners” for panels, price per panel, underlayment rolls and screws.
The big number is the estimated cost once you type a price. Before that, it shows the roof to price in squares. The list below it has the roof area, the order with waste, each cost line, panels and trim. Use “Copy link” to save or send the exact numbers.
Metal roof cost per square foot
Metal roofs are quoted per square foot of roof, or per square of 100 sq ft. The calculator turns that into a total with one line of math:
Metal roof cost = roof area × installed price per sq ft
Total = metal roof + layers × tear-off price × roof area
Installed or material only? An installed price already covers the roofer’s waste, so it is multiplied by the roof area. A material-only price is for the panels you buy, so the calculator multiplies it by the area with waste. Mixing the two is the most common mistake in online estimates. One popular calculator prices panels only in the tool, but quotes installed prices in its FAQ.
Why no built-in price? We show a published price only when we can read the dated source ourselves. We could not open our chosen cost guide when we built this page on 13 November 2026, so the price boxes are empty until you type a quote. That way the total is your number, not a national average that may not fit your house or your town.
What moves the price per sq ft? Mainly the panel type, the metal, the gauge and the coating. Roof shape matters too: hips, valleys, dormers and chimneys all mean more cutting and flashing. Steep roofs are slower and need more safety gear. The price also changes by region and by season. Get two or three quotes and run each one through the calculator.
Roof size from footprint and pitch
A sloped roof has more surface than the ground it covers. To get from one to the other, multiply by the slope factor:
Slope factor = √(1 + (rise ÷ 12)²)
At 6/12 the roof rises 6 in for every 12 in across. The slope is √(144 + 36) = 13.42 in long for 12 in on plan, so the factor is 13.42 ÷ 12 = 1.118. The same factor works for gable, hip and shed roofs, as long as every face has the same pitch.
| Pitch | Angle | Slope factor | Roof on a 1,500 sq ft footprint |
|---|---|---|---|
| 2/12 | 9.5° | 1.0138 | 1,521 sq ft |
| 3/12 | 14.0° | 1.0308 | 1,546 sq ft |
| 4/12 | 18.4° | 1.0541 | 1,581 sq ft |
| 5/12 | 22.6° | 1.0833 | 1,625 sq ft |
| 6/12 | 26.6° | 1.1180 | 1,677 sq ft |
| 7/12 | 30.3° | 1.1577 | 1,737 sq ft |
| 8/12 | 33.7° | 1.2019 | 1,803 sq ft |
| 9/12 | 36.9° | 1.2500 | 1,875 sq ft |
| 10/12 | 39.8° | 1.3017 | 1,953 sq ft |
| 12/12 | 45.0° | 1.4142 | 2,121 sq ft |
Slope factor = √(1 + (pitch ÷ 12)²). Angle = arctan(pitch ÷ 12).
Don’t forget the overhang. On a 40 × 28 ft house, a 1 ft overhang all round adds 220 sq ft on plan. At 6/12 that is 246 sq ft of roof, or 2.5 squares. If you type a footprint area, include the overhangs in it.
Below about 3/12 the calculator shows a low-slope note. Many metal panels need extra sealing below a set slope, and some are not made for it at all. The minimum is set by the panel maker, so check the installation manual for the panel you are pricing. That is not a building-code check.
Quick chart: roof squares by house size
Use this to sanity-check a quote. It gives the roof area in squares for a simple roof over common footprints, with no overhang and no waste. Multiply by your price per square to get the ballpark cost.
| Footprint | 4/12 | 6/12 | 8/12 | 12/12 | Each $1 per sq ft adds (6/12) |
|---|---|---|---|---|---|
| 1,000 sq ft | 10.54 | 11.18 | 12.02 | 14.14 | $1,118 |
| 1,500 sq ft | 15.81 | 16.77 | 18.03 | 21.21 | $1,677 |
| 2,000 sq ft | 21.08 | 22.36 | 24.04 | 28.28 | $2,236 |
| 2,500 sq ft | 26.35 | 27.95 | 30.05 | 35.36 | $2,795 |
| 3,000 sq ft | 31.62 | 33.54 | 36.06 | 42.43 | $3,354 |
Squares = footprint × slope factor ÷ 100. Last column: roof area at 6/12 × $1.
The last column is the handy one. Each dollar per sq ft in your quote adds that much to the job. So on a 2,000 sq ft footprint at 6/12, the gap between a quote of $8 and one of $11 is 3 × $2,236 = $6,708.
Standing seam vs exposed fastener
Most metal roofs on houses are one of two kinds of panel, and the kind sets much of the price.
- Standing seam. Flat pans with raised seams that lock together over hidden clips. No screw goes through the face, so there are fewer holes to seal. The panels are often narrower and need seaming tools. It is the more involved system to make and fit.
- Exposed fastener. Corrugated and ribbed panels that overlap at the edge and are screwed through the face into the deck or purlins. Wider panels and simple fixing make them quick to put down. The screws and their washers need checking over the years.
- Metal shingles and stone-coated steel. Smaller pieces made to look like shingles, tile or shakes. Enter the quote per sq ft the same way. The panel count does not apply.
Whichever you choose, count panels by the coverage width, the width each panel adds once it is joined to the next. It is always less than the full sheet. The calculator starts at 36 in, a common width for ribbed exposed-fastener panels. Change it to your panel’s figure. For a full panel cut list face by face, use the metal roofing calculator.
Gauge. The gauge is a thickness number that runs backwards: 24 gauge is thicker than 26, which is thicker than 29. Thicker panels cost more and dent less. Quote the gauge you want and keep it the same when you compare quotes.
Metal vs shingle cost
Type a shingle quote per sq ft into “Shingle price, to compare”. The calculator prices shingles on the same roof area, with the same tear-off. It then shows how much more or less the metal roof costs today, and the metal total as a percent of the shingle total.
That is a cost-today comparison. Over the life of the roof, what matters is how long each roof lasts on your house, the warranty, upkeep and how long you plan to stay. We have not found a dated source for lifespans we could check, so the calculator does not guess one. Ask each roofer what warranty comes with the product. Then divide each total by those years for a rough cost per year.
To count shingle bundles, starter and ridge cap for the same roof, use the roof shingle calculator.
Tear-off and extras
Tear-off. Most quotes include taking off the old roof. Choose 1 or 2 layers and type the removal price per sq ft per layer from your quote. The calculator multiplies it by the roof area and the layers. Two layers cost about twice as much to strip and haul. Choose “None” for a new deck, or to price metal over one layer of shingles where your local rules and the panel maker allow it.
Underlayment. The calculator gives the area to cover with waste. Type the coverage printed on the roll to get a roll count. Rolls vary a lot by product.
Trim. In the house-size mode the calculator measures the trim: eave trim (drip edge) along the eaves, rake trim up the gable ends, and ridge and hip caps. Trim is sold in set lengths, so divide by the piece length and allow for laps.
Fasteners and pipe boots. Screw patterns depend on the panel and the wind zone. Type the screws per 100 sq ft from the panel maker’s chart for a count. Add the number of pipe boots so they land on the shopping list.
What the calculator does not price: deck repairs, flashing round chimneys and skylights, gutters, snow guards, permits and dumpster fees. Ask what each quote includes before you compare the totals.
Worked examples
Each example matches what the calculator shows. Dollar figures use example prices only, not market prices. Use your own quotes.
Ranch house, 40 × 28 ft, gable, 6/12
1 ft overhang: 42 × 30 = 1,260 sq ft on plan, × 1.118 = 1,409 sq ft = 14.09 squares. Order 1,550 sq ft with 10% waste. Panels at 36 in: 42 ÷ 3 = 14 a face, 28 panels of 16 ft 9¼ in. Trim: eaves 84 ft, rakes 67.1 ft, ridge 42 ft. At an example $10 per sq ft installed and $1 per sq ft tear-off: $15,496.
“2,000 sq ft house”, one storey, 6/12
Footprint mode, 2,000 sq ft: × 1.118 = 2,236 sq ft = 22.36 squares. If that 2,000 sq ft is two storeys of 1,000 sq ft, the roof is half: 1,118 sq ft = 11.18 squares. The floor area alone does not tell you the roof size.
Hip roof, 36 × 30 ft, 6/12
1 ft overhang: 38 × 32 = 1,216 sq ft on plan, × 1.118 = 1,360 sq ft = 13.60 squares. Eave trim all round 140 ft. Ridge 38 − 32 = 6 ft. Hips: 4 × 16 ft × 1.5 (the hip factor at 6/12) = 96 ft. Panels at 36 in: 13 on each long face and 11 on each end, 48 panels, the longest 17 ft 10⅝ in, about 453 ft laid before hip offcuts.
Shed, 12 × 10 ft, 3/12
6 in overhang: 13 × 11 = 143 sq ft, × 1.0308 = 147.4 sq ft. One face: 13 ÷ 3 = 4.33, so 5 panels of 11 ft 4 in. At 3/12 there is no low-slope note, but check the panel’s minimum slope anyway.
Measured roof, 2,000 sq ft
Measured-area mode, 10% waste: 2,200 sq ft to order. At 36 in coverage that is 2,200 ÷ 3 = 733 ft of panel. With 16 ft panels, 733 ÷ 16 = 45.8, so 46 panels.
Metric: the same ranch house
12.192 × 8.5344 m with a 0.3048 m overhang at 26.57°: 117.06 m² on plan × 1.118 = 130.87 m² of roof. The same house in feet gives 1,409 sq ft, which is exactly 130.87 m². Type your price per m² in your own currency.
Notes for pros
Installed vs material. Installed prices go on the roof area. Material prices go on the area with waste. The calculator keeps them apart.
Price per unit. Switch between per sq ft, per square and per m². Typed prices convert exactly in the same currency.
Hips cost more. Same area, more cutting: hip panels are cut along each hip, and the offcuts are on top of the area.
Share the job. The link keeps every input, including prices, so a client sees the same estimate.
- The slope factor assumes every face has the same pitch. For mixed pitches, price each part as its own roof and add the totals, or measure the roof area.
- This page is an estimate, not a design. Minimum slopes, fixing patterns, underlayment and overlay rules come from the panel maker and the rules where you build.
- Need rafter or pitch numbers first? The roof pitch calculator and the rafter length calculator work them out.
Sources
Where the numbers on this page come from. Everything else is plain geometry and unit conversion, which the calculator does with exact factors.
- NIST Handbook 44, Appendix C: General Tables of Units of Measurement, National Institute of Standards and Technology, 2026 edition. Used for: 1 ft = 0.3048 m and 1 in = 25.4 mm exactly, so 1 sq ft = 0.09290304 m²; used to switch areas, lengths and prices per m² and per sq ft
- PBR-Panel Installation Manual, Metal Sales Manufacturing Corporation, edition 12/11, as cited on the CalcWall Metal Roofing Calculator (not re-opened for this page on 13 November 2026). Used for: the 36 in coverage width used as the default panel, the same default as the Metal Roofing Calculator; change it to your panel
- Metal Roof Cost Calculator, Omni Calculator, web page, undated (read as a competitor page on 13 November 2026). Used for: what other calculators offer: roof from length and width or from footprint and pitch, panel count and cost per panel, and its advice to add about 10% for waste, which is our default
No price on this page is a published figure. The planned source, the Fixr metal roofing installation cost guide (updated 23 January 2026, https://fixr.com/costs/metal-roofing-installation), could not be opened on 13 November 2026, so all prices are your own inputs. Dollar amounts in the examples are example prices only.
Frequently asked questions
How much is a metal roof on a 2,000 sq ft house?
Start with the roof, not the floor area. One storey on a 2,000 sq ft footprint with a 6/12 roof has about 2,236 sq ft of roof (22.36 squares) before overhangs. Two storeys of 1,000 sq ft have half that. Multiply the roof area by the installed price per sq ft in your quote. At an example $10 per sq ft, 2,236 sq ft comes to $22,360. Use your own quote.
Is metal cheaper than shingles over time?
It depends on what each roof costs today and how long each one lasts on your house. We have not found a dated lifespan source we could check. The calculator compares the cost today: enter a shingle quote next to the metal quote and it prices both for the same roof and tear-off. To compare over time, divide each total by the warranty years for that product.
Why does this calculator have no built-in prices?
We only show a price when we can read a dated source and check the figure. On 13 November 2026 we could not open the cost guide we had picked, so instead of guessing we ask for the prices from your own quotes. Every result is still worked out for you: roof area, squares, panels, trim, tear-off and the totals.
What is a roofing square?
A square is 100 sq ft of roof surface. Roofers price and order by the square, so a quote of so much “per square” is 100 times the price per sq ft. A 1,409 sq ft roof is 14.09 squares. The calculator takes prices per sq ft, per square or per m², and converts between them exactly.
Is standing seam more expensive than corrugated metal?
Standing seam is the more involved system. The panels are joined by raised seams over hidden clips, so no screws pass through the face, and the panels are often narrower. Exposed-fastener panels, such as corrugated and ribbed panels, overlap and are screwed through. Get a quote for each and enter both prices one after the other to see the difference on your roof.
What gauge of metal roofing should I use?
Gauge is a number for sheet thickness: the lower the number, the thicker the steel. So 24 gauge is thicker than 26, and 26 is thicker than 29. Thicker panels cost more and dent less. Which gauge a panel comes in, and which one your area or your roof needs, comes from the panel maker and your local rules. The calculator does not change the price by gauge: use the quote for the gauge you want.
Can I put a metal roof over my old shingles?
Some metal roofs are put over one layer of shingles, which saves the tear-off. Whether that is allowed depends on your local building rules, the state of the roof deck and the panel maker’s instructions, so check them first. In the calculator, set the layers to tear off to none to price an overlay, or to 1 or 2 to add removal.
How do I measure my roof for a metal roof cost estimate?
Measure the house length and width on the ground, then add the overhang at each side. Find the pitch from the plans, with a level in the attic, or with the Roof Pitch Calculator. The calculator multiplies the plan area by the slope factor √(1 + (pitch ÷ 12)²). If you already know the roof area from a roofer’s report, choose “Measured roof area” and type it in.
How many metal panels do I need?
On a gable roof, each face needs the eave length divided by the panel’s coverage width, rounded up. With 36 in panels on a 42 ft eave that is 14 a face, 28 in all. Each panel runs eave to ridge: half the 30 ft width × 1.118 = 16 ft 9¼ in at 6/12. Hip roofs need more cutting, so the calculator gives the panel count and the length laid.
Does the calculator work in metric and other currencies?
Yes. Switch to meters or pick a country with the region menu. Areas show in m², panel widths in mm and prices per m² in your currency. Typed prices are never converted between currencies: if you change country to one with a different currency, the prices are cleared and you type them again.
Is this metal roof cost calculator free to use online?
Yes. The CalcWall Metal Roof Cost Calculator is completely free and works online in any browser, on a phone, tablet or computer. There is nothing to download and no account to create, and the math runs right in your browser, so results appear as you type.