Quick answer: hardwood floor refinishing cost = floor area × the price per sq ft for your method, plus stairs, repairs and furniture moving. This Old House (updated 5 June 2026) puts it at $3 to $8 per sq ft. A 12 × 12 ft room is 144 sq ft: about $432 to $1,152. A screen and recoat costs far less, around $1 to $2 per sq ft.

How to use the calculator
Most refinishing cost guides give you one national range and leave the rest to you. That range hides the things that move your price the most: the method, the stairs, the boards that need fixing and whether the crew has to empty the rooms first. So the calculator asks for each of those and adds them up.
- Method. Screen and recoat, sand and refinish, sand and stain, dustless sanding or sandless refinishing. Each has its own price per sq ft.
- Who does the work. Hire a pro, or do it yourself with rented machines. Both totals are worked out, so you see one next to the other.
- Floor. Solid hardwood or engineered, and how thick the wear layer is. If the floor cannot take a sanding, you get a warning.
- Rooms. Length and width of each floor, and how many rooms of that size. Name them if you like; the names show in the result and the shopping list.
- Stairs, repairs and extras. Steps, the area of boards to repair, carpet to pull up first, furniture moving and anything else.
In the US, sample prices are filled in for you: the middle of each range from This Old House and HomeGuide, read on 20 November 2026. Each field shows the range it came from. Type over them with your quotes. In other countries the fields start empty, because we did not find a dated price we could check. Share the link and your rooms and prices go with it.
Hardwood floor refinishing cost per square foot
Refinishers price the floor by the square foot, so the calculator does too. The formula it uses for a pro job is short:
Total = area × method rate + steps × per step + repair area × repair rate + rooms × furniture + other
- Area = length × width of each room, times how many, added up. A 14 × 16 ft room is 224 sq ft.
- Method rate is the price per sq ft for the job you picked, labor and materials together.
- Extras are priced on their own basis: per step, per sq ft of repair, per room of furniture.
- Minimum job fee: if the total comes out under the crew’s minimum, it is raised to the minimum.
The published ranges agree on the headline: This Old House and NerdWallet both give $3 to $8 per sq ft for a refinish, and This Old House puts the average job at $1,800. Where they differ is in the detail. NerdWallet lists sanding at $0.50 to $3, while This Old House has it at $3 to $5.50. Treat the sample prices as a starting point, not as a quote.
The line under the answer gives your all-in rate per sq ft. Divide any quote by your floor area and you can compare two crews on the same footing, even if one quotes a total and the other a rate.
Cost by method
The method is the biggest choice you make. It decides how much of the old floor comes off, and so how much labor and dust there is.
| Method | This Old House (5 Jun 2026) | HomeGuide (undated) | Sample used (US) | Good for |
|---|---|---|---|---|
| Screen and recoat | Recoating $1–$2; buffing $1–$2.50 | $1.00–$2.50 | $1.50 | Dull finish, light scuffs |
| Sand and refinish | Sanding $3–$5.50 | $1.50–$5.00 | $4.25 | Deep scratches, worn traffic paths |
| Sand, stain and refinish | Sanding + staining ($1–$3): $4–$8.50 | $2.00–$7.00 | $6.25 | A new color |
| Dustless sanding | $5–$8 | — | $6.50 | Occupied homes, less cleanup |
| Sandless refinishing | — | $1.50–$4.00 | $2.75 | Engineered floors, finish in fair shape |
All per sq ft, US dollars. The sample is the middle of the range in the first source column that has one; the sand-and-stain sample adds This Old House’s sanding and staining ranges together. Prices read 20 November 2026.
A screen and recoat is worth trying first if the finish is dull but the wood is not damaged. If water has turned boards gray or black, or the finish is worn through to bare wood in the hallways, a recoat will not hide it. That floor needs sanding.
Cost by room size
The table works out common room sizes at This Old House’s $3 to $8 range and at the $4.25 sand-and-refinish sample. HomeGuide publishes its own table, shown in the last column. Notice how its small-room figures sit above the plain area × rate: that is the minimum job fee at work.
| Room | Floor area | At $3–$8 per sq ft | At $4.25 (sand and refinish) | HomeGuide’s table |
|---|---|---|---|---|
| 4 × 10 ft hall | 40 sq ft (3.72 m²) | $120–$320 | $170 | $300–$500 |
| 10 × 10 ft | 100 sq ft (9.29 m²) | $300–$800 | $425 | $400–$600 |
| 12 × 12 ft | 144 sq ft (13.38 m²) | $432–$1,152 | $612 | $500–$900 |
| 16 × 16 ft | 256 sq ft (23.78 m²) | $768–$2,048 | $1,088 | $700–$1,500 |
| 20 × 20 ft | 400 sq ft (37.16 m²) | $1,200–$3,200 | $1,700 | $1,000–$2,000 |
| 24 × 24 ft | 576 sq ft (53.51 m²) | $1,728–$4,608 | $2,448 | $1,200–$2,800 |
| Whole house | 1,000 sq ft (92.90 m²) | $3,000–$8,000 | $4,250 | $2,000–$4,000 |
| Whole house | 1,500 sq ft (139.35 m²) | $4,500–$12,000 | $6,375 | $2,800–$6,000 |
| Whole house | 2,000 sq ft (185.81 m²) | $6,000–$16,000 | $8,500 | $3,400–$8,000 |
Area × rate, floor only. m² = sq ft × 0.09290304. Stairs, repairs and furniture moving come on top.
HomeGuide’s whole-house figures are lower than area × $3–$8. Big jobs often get a lower rate per sq ft, because the crew sets up once. If you are quoting a whole floor, ask for the rate per sq ft and put it in the calculator rather than using the sample.
For the floor area, measure each room wall to wall and leave out built-in cabinets. Split an L-shaped room into two rectangles and enter each one. Closets count if they have the same floor. The square yards calculator and the square meters calculator help with odd shapes.
Stairs, repairs and extras
The extras are where quotes differ most, so they get their own lines in the calculator. Every one of them is added to the total, not left as a footnote.
| Extra | Published price (US) | Source | How it is counted |
|---|---|---|---|
| Stairs | $25–$85 per step; $300–$1,200 for 12 to 14 steps | HomeGuide (undated) | Steps × price per step |
| Board repairs | $6–$12 per sq ft | This Old House (5 Jun 2026) | Repair area × rate |
| Board repairs | $2–$20 per sq ft | HomeGuide (undated) | Cross-check |
| Subfloor repair | $3–$10 per sq ft | This Old House (5 Jun 2026) | Enter under Other costs |
| Carpet removal first | $1–$5 per sq ft | This Old House (5 Jun 2026) | Carpet area × rate |
| Furniture moving | $20–$50 per room | This Old House; HomeGuide | Rooms × price per room |
| Minimum job fee | No figure published | HomeGuide mentions it | Total raised to the minimum |
Stairs are hand work: the treads are sanded with an edger and a detail sander, and the risers and nosings by hand. That is why they are priced per step. If only the treads are wood and the risers are painted, say so when you ask for a quote.
Repairs mean replacing cracked, cupped or stained boards before sanding, so the new wood takes the same finish. Measure the patch in sq ft. Found hardwood under old carpet? Add the carpet area and the crew’s removal price. Pulling it up yourself saves that line, but leave the tack strips for the pro if you are not sure how.
DIY vs hiring a pro
Doing it yourself saves most of the labor, which is most of the bill. This Old House puts a DIY job at $500 to $1,000 for materials, rentals and safety gear, and HomeGuide at $600 to $1,100. What you pay instead is time and risk: a drum sander left running in one spot can dig a dip you will see forever.
| Item | This Old House (5 Jun 2026) | HomeGuide (undated) | NerdWallet (11 Feb 2026) |
|---|---|---|---|
| Drum sander, per day | $50–$80 | $60–$70 (floor sander) | about $40–$60 |
| Edger, per day | $35–$45 | $37–$46 | — |
| Belt sander, per day | $15–$25 | $16–$26 | — |
| Sandpaper | $30–$60 | $30–$60 | — |
| Polyurethane top coat | $20–$50 per gallon | — | — |
| Water-based top coat | $30–$55 per gallon | — | — |
| Stain | $20–$60 per gallon | — | — |
| Whole DIY job | $500–$1,000 | $600–$1,100 | — |
In DIY mode, the calculator asks for the days you rent the machines, the sander and edger rates, sandpaper, how much finish and stain you will buy and their price, plus tools and safety gear. It does not guess how many gallons you need: read the coverage on the can and the number of coats the maker suggests, then enter the gallons. This Old House’s safety list includes a respirator ($30–$70), goggles ($5–$15) and knee pads ($10–$20).
For a screen and recoat, the sander becomes a floor buffer and the sandpaper becomes screens or pads. We did not find a published buffer rental price, so that field starts empty: enter your rental shop’s rate.
Stairs, repairs and carpet removal stay in the DIY total at the prices you enter. Many people sand the open floor themselves and hire out the stairs, which is the hardest part to get right.
Engineered floors: can it be sanded?
Engineered hardwood looks like solid wood from above, but only the top layer is hardwood. Under it is plywood or fiberboard. Sand through that wear layer and the floor is ruined, so check before you pick a sanding method.
- Wear layer 2 mm or more: HomeGuide says engineered floors may be sanded and refinished 1 to 5 times, depending on the wear layer’s thickness.
- Under 2 mm: HomeGuide says it should not be sanded. A screen and recoat is the safe choice.
- Acrylic-impregnated: HomeGuide says these cannot be sanded and refinished, but may be screened and recoated.
- This Old House says some engineered hardwood can be refinished, usually only once or twice in its life.
To check, lift a floor vent cover or look at the edge of a board at a doorway threshold. Measure the top layer. Pick the floor type in the calculator and it warns you when the method does not suit it. If you are not sure, ask the refinisher to look before they quote sanding.
Worked examples
These use the US sample prices (the middle of each published range) unless they say otherwise. Your quotes will differ.
One bedroom, 12 × 12 ft, sand and refinish
Area 144 sq ft. Pro: 144 × $4.25 = $612. DIY for one day with 3 gallons of finish (an example amount): sander $65 + edger $40 + sandpaper $45 + 3 × $35 finish = $255.
Worked example: 500 sq ft, sand and stain, with stairs
Living room 20 × 15 ft (300 sq ft) and dining room 10 × 20 ft (200 sq ft) = 500 sq ft. Pro at $6.25: 500 × 6.25 = $3,125. Stairs 13 × $55 = $715. Repairs 20 sq ft × $9 = $180. Furniture 2 rooms × $35 = $70. Total $4,090, or $8.18 per sq ft. DIY over 2 days: sanders $130 + $80, sandpaper $45, 4 gallons of finish $140, 2 gallons of stain $80, plus the same stairs and repairs: $1,370.
Small hall with a minimum job fee
A 4 × 10 ft hall is 40 sq ft: 40 × $4.25 = $170. Say the crew’s minimum is $400 (a made-up figure; ask yours). The calculator raises the total to $400 and shows that the work alone came to $170. Doing the hall with the next room often costs little more.
Whole floor, screen and recoat
A 25 × 40 ft open floor is 1,000 sq ft. At $1.50 per sq ft: $1,500, against $4,250 to sand and refinish the same floor at $4.25. If the finish is only dull, the recoat saves most of the cost.
UK lounge, 4 × 3.5 m, your own price
Area 14 m² (150.7 sq ft). There is no dated UK figure in the calculator, so enter your quote; say £30 per m² (made up for the sum). 14 × £30 = £420. Switch to feet and the rate shows as £2.79 per sq ft; the total stays £420.
How often floors can be refinished
Every full sanding takes a thin skin of wood. Solid hardwood has plenty to give: HomeGuide says 4 to 10 refinishes depending on thickness and age, and This Old House says up to 12. Engineered floors have far fewer, as above.
A screen and recoat removes almost nothing, so it does not use up a sanding. Recoating before the finish wears through, when traffic paths start to look dull, keeps the wood itself from wearing and pushes the next full sanding years away. That is also the cheapest line in the method table.
Plan for the time too. This Old House says three to five days, HomeGuide 2 to 6 days, and NerdWallet 3 to 5 days for 1,000 sq ft. Stain and oil-based finishes add drying time between coats, and furniture should stay off until the finish has cured. Put rugs back last: the rug size calculator finds the size that fits each room.
Notes for pros
Line-item quotes. Share the link: the client sees floor, stairs, repairs and furniture as separate lines.
Minimum fee. Enter yours once; small rooms show the minimum and what the work alone would cost.
Check the wear layer. Pick the floor type; the page warns when sanding is not advised.
Metric clients. Rates per m² convert exactly (1 m² = 10.7639 sq ft) when switching units.
- Sample prices are published US ranges, not your market. Replace them with your own rates before sending a link.
- Prices are never converted between currencies. Changing to a country with another currency clears them.
- This page estimates cost. It does not tell you which finish products are allowed where you work; check local rules on finishes and dust.
Replacing rather than refinishing? The carpet installation cost calculator prices new carpet, pad and stairs the same way, and the popcorn ceiling removal cost calculator helps if the ceiling is next on the list.
Sources
Where the numbers on this page come from. Everything else is plain geometry and unit conversion, which the calculator does with exact factors.
- How Much Does It Cost To Refinish Hardwood Floors?, This Old House, web page, updated 5 June 2026 (read 20 November 2026). Used for: average $1,800 and $3–$8 per sq ft; sanding $3–$5.50, staining $1–$3, recoating $1–$2, buffing $1–$2.50 and dustless refinishing $5–$8 per sq ft; condition repairs $6–$12, subfloor repair $3–$10 and carpet removal $1–$5 per sq ft; furniture moving $20–$50 per room; cleanup labor $60–$160 per hour; rentals (drum sander $50–$80, edger $35–$45, belt sander $15–$25 per day); supplies (sandpaper $30–$60, stain $20–$60 and polyurethane $20–$50 per gallon, water-based top coat $30–$55 per gallon); DIY total $500–$1,000; solid wood up to 12 refinishes; engineered usually once or twice; three to five days
- How much does it cost to refinish hardwood floors?, HomeGuide, web page, undated (read 20 November 2026). Used for: per sq ft by method (screen, buff and recoat $1.00–$2.50; sand and refinish $1.50–$5.00; sand, stain and refinish $2.00–$7.00; sandless $1.50–$4.00); stairs $25–$85 per step; repairs $2–$20 per sq ft; furniture $20–$50 per room; minimum job fees on small spaces (no figure); cost by room size table; DIY rentals and total $600–$1,100; engineered floors 1–5 refinishes, wear layers under 2 mm not to be sanded, acrylic-impregnated only screened and recoated; solid floors 4–10 refinishes; 2–6 days
- Cost to Refinish Hardwood Floors, NerdWallet, web page, updated 11 February 2026 (read 20 November 2026). Used for: cross-check: $3–$8 per sq ft (citing Angi); by process, sanding $0.50–$3, staining $1–$3, recoating $1–$2 per sq ft; sander rental about $40–$60 per day; 3–5 days for 1,000 sq ft
- NIST Handbook 44, Appendix C: General Tables of Units of Measurement, National Institute of Standards and Technology, 2026 edition. Used for: 1 ft = 0.3048 m exactly, so 1 sq ft = 0.09290304 m² and 1 m² = 10.7639 sq ft
Frequently asked questions
How much does it cost to refinish hardwood floors?
This Old House (updated 5 June 2026) puts it at $3 to $8 per square foot, about $1,800 on average, and NerdWallet (11 February 2026, citing Angi) gives the same $3 to $8. A 12 × 12 ft room is 144 sq ft, so roughly $432 to $1,152 before stairs, repairs or furniture moving. The calculator prices your rooms by method.
Screen and recoat vs full refinish: what’s the difference?
A screen and recoat buffs the top of the old finish and adds a fresh top coat. It fixes dullness and light scuffs but not deep scratches, bare spots or a color change. A full refinish sands to bare wood and puts on new finish, with stain if you want one. This Old House lists recoating at $1 to $2 per sq ft and sanding at $3 to $5.50.
Can I refinish hardwood floors myself?
Yes, if you are patient with a drum sander. This Old House puts DIY at $500 to $1,000 and HomeGuide at $600 to $1,100 for rentals, sandpaper, finish and safety gear. The risk is gouging the floor with the sander. Switch the calculator to “Do it yourself” to see your cost next to the pro price for the same rooms.
How many times can a floor be refinished?
It depends on how much wood is left above the tongue. HomeGuide says solid hardwood can be refinished 4 to 10 times, and This Old House says up to 12. Each full sanding takes a little wood. A screen and recoat takes almost none, so recoating every few years keeps sandings to a minimum.
Can engineered hardwood be refinished?
Sometimes. Only the top wear layer is hardwood. HomeGuide says engineered floors can be sanded 1 to 5 times depending on that layer, that wear layers under 2 mm should not be sanded, and that acrylic-impregnated floors can only be screened and recoated. This Old House says usually once or twice. The calculator warns you if the method and floor do not match.
How long does refinishing take?
This Old House says three to five days, HomeGuide 2 to 6 days depending on size, layout, finish and stain, and NerdWallet 3 to 5 days for 1,000 sq ft. Stain and oil-based finish add drying time between coats. Plan to stay off the floor, or out of the house, while it cures.
How much does it cost to refinish stairs?
HomeGuide lists $25 to $85 per step, and $300 to $1,200 for a staircase of 12 to 14 steps. Stairs are slow hand work, which is why they are priced per step rather than per sq ft. Enter the number of steps and your price per step and they are added to the total.
Why is a small room so expensive per square foot?
Crews have a minimum job fee to cover travel, setup and the machines. HomeGuide notes that labor costs more per sq ft on small spaces for this reason but gives no figure, so the calculator has a minimum job fee field with no default. Enter the minimum your refinisher quotes and the total is raised to it if the work comes to less.
Why are there no prices for my country?
We only fill in prices we have read on a dated, published page. On 20 November 2026 we had US figures only. For the UK, Canada, Australia, New Zealand and Germany the price fields start empty: enter your quotes in your own currency. We never convert US dollars, because labor rates do not follow exchange rates.
Is this hardwood floor refinishing cost calculator free to use online?
Yes. The CalcWall Hardwood Floor Refinishing Cost Calculator is completely free and works online in any browser, on a phone, tablet or computer. There is nothing to download and no account to create, and the math runs right in your browser, so results appear as you type.