Carpet Installation Cost Calculator

Price new carpet before you call a store. This carpet installation cost calculator takes each room and your stairs, works out the carpet to buy in square yards (with the roll seams if you want them) and adds carpet, pad, labor, removal, stairs and furniture moving into one installed cost. This free online carpet installation cost calculator works on any phone or computer, with no sign-up or download.

Jump to:Cost per sq ftWhat is includedBy room sizeStairsFAQ

Rooms (length × width)

Stairs (leave at 0 for none)

Per step = tread depth + riser height + about 1½ in (4 cm) to wrap the nose. 19 in suits a 10 in tread and 7½ in riser.

Your result

Estimated installed cost

—

Your numbers in 3D · changes as you typeOpen full designer ↗

Quick answer: carpet installation costs about $3 to $11 per square foot in the US, all in (NerdWallet, updated July 2025). A 12 × 12 ft room is 144 sq ft, so $432 to $1,584, about $1,008 in the middle, and it needs 18 sq yd of carpet with 10% extra.

Carpet installation cost calculator at a glance: installed cost equals carpet bought plus pad, labor, removal, stairs and extras. A 12 by 12 foot room is 144 square feet, 18 square yards of carpet with 10% extra, and $432 to $1,584 at the published $3 to $11 per square foot.
Carpet you buy, plus every line on the quote, divided by the floor you get.

How to use the calculator

Use it as a carpet cost calculator for one room or the whole house. There are two ways to get a number. Start with the quick range if you just want a ballpark, then switch to itemized when you have prices from a store.

  • Quick published range (US). Your floor area times the published $3 to $11 per sq ft, plus $400 to $800 if you have stairs. You see the low, high and middle. It is a national range, so treat it as a sanity check, not a quote.
  • Itemized, with your prices. Type the carpet price, pad, labor, removal, a price per step for the stairs, furniture moving and anything else on the quote. Prices can be per square foot or per square yard; the calculator converts between them. The pad and removal boxes show the published ranges as hints.
  1. Enter each room as a row: length, width and how many rooms of that size. Closets and halls are just more rows.
  2. For stairs, give the number of steps, the stair width and the carpet per step.
  3. Choose how the carpet to buy is worked out: area plus 10% (the same math as our carpet calculator, so the two always agree) or a roll-cut plan that follows the seams.
  4. Pick the quick range or type your prices, then share the link or add the result to your shopping list.

The 3D room under the answer follows what you type, and the full designer opens with the same numbers.

Carpet installation cost per square foot

The figure most people search for is the all-in price per square foot. NerdWallet, updated July 15, 2025, puts replacing carpet at $3 to $11 per square foot, or about $1,800 for a typical 330 sq ft living room. That range covers cheap polyester with thin pad at one end and wool with a thick cushion at the other. In square yards, which is how many stores still quote, it is $27 to $99 per sq yd.

We tried to read the This Old House cost guide (updated 06/08/2026) as well, but it could not be opened from our research tools, so none of its figures are used here.

The NerdWallet page is the only price source on this page, and every figure we quote from it is in the sources list with its date. Outside the US we found no price page we could read, so in the UK, Canada, Australia, New Zealand and Germany the calculator asks for your own prices and never shows US dollars as yours.

To turn any quote into a per-square-foot price, add all its lines and divide by the floor area. The calculator does this at the bottom of the itemized result, so you can line up two quotes that were written differently.

What is included: carpet, pad, labor, removal

A carpet quote is usually four or five lines. Knowing them stops you comparing a carpet-only price with an installed one.

Where the money goes: 12 × 12 ft room, example pricesCarpet 18 sq yd: $486Pad 16 sq yd: $108Labor: $144Removal: $72Furniture: $100Total $910 = $6.32 per sq ft of floor ($56.88 per sq yd)Carpet is bought with 10% extra; pad, labor and removal are on the 144 sq ft floor.
An example quote split into its lines. The carpet line is bigger than the floor because of the 10% extra.
Line on the quoteHow the calculator prices itPublished US range
CarpetCarpet to buy (area + extra, or the roll plan) × your pricePart of the $3–$11 per sq ft all-in figure
Pad (cushion)Carpeted area (rooms + stairs) × your price$0.75–$2 per sq ft
LaborFloor area of the rooms × your price$50–$100 per hour (HomeWyse, via NerdWallet)
Old carpet removalFloor area of the rooms × your price$1–$5 per sq ft
StairsNumber of steps × your price per step$400–$800 a set
Furniture moving, otherFlat amounts you enterNot published in our source

A few things to check on any quote. Is the pad included, and which one? Is removal priced, and does it include hauling the old carpet away? Are tack strip, seaming and transitions at doorways in the labor price or extra?

NerdWallet also lists subfloor preparation at $3 to $10 per sq ft when the floor underneath needs work; that only shows up once the old carpet is up, so ask how the fitter will price it if it happens. Use the “Other” box for transitions, haul-away or a trip charge.

Cost by room size

The cost to carpet a room depends mostly on its floor area. This chart uses the published $3 to $11 per sq ft and the carpet to buy with 10% extra, rounded up to whole square yards. The last column is what one 12 ft roll needs when every piece runs the same way.

RoomFloor areaInstalled cost ($3–$11 per sq ft)Carpet with 10% (sq yd)From a 12 ft roll (sq yd)
10 × 10 ft100 sq ft$300 – $1,1001313.3
10 × 12 ft120 sq ft$360 – $1,3201513.3
12 × 12 ft144 sq ft$432 – $1,5841816
12 × 15 ft180 sq ft$540 – $1,9802220
12 × 18 ft216 sq ft$648 – $2,3762724
14 × 16 ft224 sq ft$672 – $2,4642837.3
16 × 20 ft320 sq ft$960 – $3,5204042.7

Rooms up to 12 ft across fit the roll without a seam, so the roll plan can come out below area plus 10%: the fitter still trims the edges, so don’t budget below the area figure. Rooms wider than the roll jump, because the fill strip needs a full-length cut. For bigger jobs NerdWallet lists 500 sq ft at $1,500 to $5,500 and 1,000 sq ft at $3,000 to $11,000, which is the same $3 to $11 per sq ft.

Cost by carpet style

The carpet itself is the line that moves the total most. NerdWallet publishes these ranges per square foot by pile style. It does not say whether they include installation, so use them to compare styles, not as an installed price.

Pile stylePer sq ft (as published)Per sq yd (× 9)
Multi-level loop$1 – $3$9 – $27
Level loop$1 – $5$9 – $45
Frieze$1 – $8$9 – $72
Saxony or plush$2 – $8$18 – $72
Cable$4 – $8$36 – $72
Cut-and-loop$1 – $10$9 – $90
Texture or twist$1 – $12$9 – $108
Berber$3 – $20$27 – $180

Fiber matters as much as style. Nylon and triexta cost more than polyester and olefin, and wool costs the most. Take the price per square yard from the label on the sample and type it in as the carpet price.

Roll width, seams and the carpet you pay for

The area method is what most online calculators use: floor area plus 10%, divided by 9. It is right for rooms that fit the roll. For a room wider than the roll it can be well short, because carpet pieces next to each other must have their pile running the same way, or the seam shows as a change in shade. The fill strip has to come from a full-length cut.

14 × 16 ft room from a 12 ft roll: 28 ft of rollmain piece 12 × 14 ftfill strip 4 × 14 ftseam14 ft (roll runs this way →)Second 14 ft cutused as the fill stripspare 4 × 14 ftspare 4 × 14 ft2 cuts × 14 ft × 12 ft = 336 sq ft = 37.3 sq ydby area + 10%: 28 sq yd
The fill strip comes from a second full-length cut; two strips from that cut are left over.

The roll-cut plan in the calculator works this out room by room. For each room it tries the roll both ways and keeps the one that uses less roll: the number of widths needed across the room (rounded up) times the room length. Stairs are cut as step pieces side by side across the roll, pile running down the stairs.

The result is shown in feet or meters of roll and in square yards or m², and you can price the carpet on it. Spare strips can often finish a closet or a hall, so a fitter who plans the whole house may order a little less than the room-by-room total.

Measure each space wall to wall, one row eachBedroom12 × 15 ft = 180 sq ftcloset 6 × 2hall 10 × 3½ ft = 35 sq ft15 ft12 ftRows to enter15 × 12 × 12 × 6 × 110 × 3.5 × 1= 227 sq ft= 25.2 sq yd
Measure each space wall to wall at its widest point and add it as its own row.

Stairs cost

The cost to carpet stairs is worked out differently from rooms because each step is cut, wrapped and fixed by hand. NerdWallet puts a straight set of stairs at $400 to $800, curved or spiral stairs at $1,000 or more, and says stair carpet runs $1 to $2 more per sq ft than flat floor. It gives no price per step, so the calculator asks for your fitter’s price per step and adds the stair carpet to the carpet and pad you buy.

Carpet per step = tread + nose wrap + risertread 10 inriser 7½ innose wrap ≈ 1½ in≈ 19 in per step13 steps × 3 ft wide× 19/12 ft= 61.75 sq ft
Measure one step along the carpet’s path, then multiply by the steps and the stair width.

A typical 13-step flight, 3 ft wide, at 19 in per step uses 61.75 sq ft of carpet, about 6.9 sq yd. Landings are just another room row. In the quick range mode, any steps add one published stairs set to the range.

Cheaper ways to save

  • Get every quote itemized. Enter each one in the calculator and compare the per sq ft totals, not the headline price.
  • Pull up the old carpet yourself if you have the time. Removal is $1 to $5 per sq ft in our source.
  • Move the furniture yourself and leave the box blank.
  • Pick a style in the middle. The table above shows how wide the price spread is between styles.
  • Plan the house at once. One order lets the fitter use spare strips in closets and halls.
  • Don’t skimp on pad. Use what the carpet maker asks for; the wrong pad can void the carpet warranty.

Worked examples

1. A 12 × 12 ft bedroom, quick range

144 sq ft × $3 = $432; × $11 = $1,584; middle $1,008. Carpet to buy: 144 × 1.10 ÷ 9 = 17.6, so 18 sq yd.

2. The same room, itemized

Carpet $27 per sq yd × 18 sq yd = $486. Pad $6.75 per sq yd × 16 sq yd = $108. Labor $9 per sq yd × 16 = $144. Removal $4.50 per sq yd × 16 = $72. Furniture moving $100. Total $910, which is $6.32 per sq ft or $56.88 per sq yd. Entered per sq ft instead ($3, $0.75, $1, $0.50), the total is the same.

3. Bedroom plus a flight of stairs

A 12 × 15 ft bedroom (180 sq ft) and 13 steps, 3 ft wide, 19 in per step (61.75 sq ft). Carpet to buy: 241.75 × 1.10 ÷ 9 = 29.5, so 30 sq yd. Quick range: 180 × $3 + $400 = $940 to 180 × $11 + $800 = $2,780, middle $1,860.

4. A room wider than the roll

14 × 16 ft on a 12 ft roll. Run the roll along the 14 ft side: 2 widths × 14 ft = 28 ft of roll; the other way is 2 × 16 = 32 ft. So 28 ft × 12 ft = 336 sq ft = 37.3 sq yd, against 28 sq yd by area. At $30 per sq yd the carpet is $1,120 on the roll plan, $840 by area.

5. A UK bedroom in metric

3.6 × 3.6 m = 12.96 m²; × 1.10 = 14.3, so 15 m² of carpet. At £20 per m² for carpet, £4 per m² for underlay and £8 per m² for fitting: £300 + £51.84 + £103.68 = £455.52. These are example prices you type, not published UK prices.

Notes for pros

Quote both quantities. Show the customer the area figure and the roll plan. It explains why your yardage is higher than an online calculator’s.

Price stairs per step. Steps take far longer than flat floor. A per-step line keeps the room price honest and makes quotes easy to compare.

Pile direction and seams. Keep adjoining pieces running the same way and seams out of doorways and main traffic (CRI 105).

Share the link. The share link reopens the rooms, stairs and prices, so the customer sees exactly what you priced.

Other tools for the same job: the square yards calculator converts any area for a quote, and the rug size calculator helps if a large rug is the cheaper option for one room. For hard floors elsewhere, the tile calculator works by area plus waste in the same way.

Estimates only. Prices vary by region, store, carpet and the state of the floor underneath. The published figures are US national ranges with the date shown; check them against local quotes.

Sources

Where the numbers on this page come from. Everything else is plain geometry and unit conversion, which the calculator does with exact factors.

  • Cost to Replace Carpet, NerdWallet (Dalia Ramirez; edited by Mary M. Flory), updated Jul 15, 2025 (read 13 November 2026). Used for: the US ranges shown on this page: $3 to $11 per sq ft to replace carpet, padding $0.75 to $2 per sq ft, removal of old carpet $1 to $5 per sq ft, $400 to $800 for a set of stairs, the cost by pile style table, labor at $50 to $100 per hour (which NerdWallet attributes to HomeWyse) and 1 to 2 hours for a single room
  • CRI 105 Standard for Installation of Residential Carpet, The Carpet and Rug Institute, 2019 edition (revisions through 2018). Used for: keeping the pile direction the same in adjoining pieces and keeping seams few and out of doorways and main traffic, which is why the roll-cut plan runs every piece the same way (as cited on our Carpet Calculator page)
  • NIST Handbook 44, Appendix C: General Tables of Units of Measurement, National Institute of Standards and Technology, 2026 edition. Used for: 1 square yard = 9 square feet and 1 ft = 0.3048 m, so 1 sq ft = 0.09290304 m²

Frequently asked questions

How much does it cost to carpet a 12x12 room?

A 12 × 12 ft room is 144 sq ft. At the published US range of $3 to $11 per sq ft installed (NerdWallet, updated July 2025), that is $432 to $1,584, with $1,008 in the middle. You buy about 18 sq yd of carpet for it, with 10% extra for seams and trimming. Your own prices give a tighter number: switch the calculator to “Itemized”.

Is padding included in carpet installation?

Sometimes. Many stores quote carpet, pad and labor as one price per square yard, and others list the pad separately. NerdWallet gives $0.75 to $2 per sq ft for padding. Ask the store to show the pad on its own line, then enter it in the calculator so you can compare quotes like for like.

How much to carpet stairs?

NerdWallet puts a set of stairs at $400 to $800, and curved or spiral stairs at $1,000 or more; it gives no price per step. Each step takes about 19 in of carpet along its path, so a 13-step flight 3 ft wide uses about 62 sq ft. Enter the steps and your fitter’s price per step to see your own figure.

How long does carpet installation take?

NerdWallet says a single room takes about 1 to 2 hours, and several rooms can take 4 hours or more. Moving furniture, pulling up old carpet and stairs add time. Ask your fitter whether the quote is by the hour or by the square yard.

How do I work out carpet installation cost per square foot?

Add up every line on the quote (carpet, pad, labor, removal, stairs and extras) and divide by the floor area in square feet. The calculator does this for you and shows the result per square foot and per square yard. A quote of $910 for a 12 × 12 ft room is $6.32 per sq ft, or $56.88 per sq yd.

Why does my quote charge for more carpet than my room?

Carpet comes off a roll of fixed width, often 12 ft, and every piece must run the same way. A 14 × 16 ft room needs 28 sq yd by area plus 10%, but about 37.3 sq yd from a 12 ft roll. Pick “Roll-cut plan” in the calculator to see the roll quantity and price your carpet on it.

Does it cost extra to remove old carpet?

Usually, yes. NerdWallet gives $1 to $5 per sq ft to remove existing carpet, and $1 to $3 more per sq ft if other flooring has to come up too. Some stores include removal and haul-away; ask. Leave the removal box blank if you have nothing to take up.

Is carpet priced per square foot or per square yard?

Both are common in the US. A square yard is 9 square feet, so $27 per sq yd is the same as $3 per sq ft. Switch “Prices are per” and the calculator converts what you typed. In metric countries prices are per m².

Is this carpet installation cost calculator free to use online?

Yes. The CalcWall Carpet Installation Cost Calculator is completely free and works online in any browser, on a phone, tablet or computer. There is nothing to download and no account to create, and the math runs right in your browser, so results appear as you type.

All Interiors calculators →

Last updated ·How we calculate · Results are estimates; confirm quantities with your supplier.