Concrete Cost Calculator

Price a concrete slab, patio or pad before you call for quotes. This concrete cost calculator works out the concrete, the delivery fees and the labor, with published prices for your country. This free online concrete cost calculator works on any phone or computer, with no sign-up or download.

Jump to:How it worksPrice per yardSlab costBy countryFAQ

Extras (tick to include)

Your result

Estimated cost

—

Your numbers in 3D · changes as you typeOpen full designer ↗

Keep this result as option A, then change any input (for example 4 in or 6 in thick, or bags instead of ready-mix) to see option A and option B side by side.

Quick answer: a 10 × 10 ft slab 4 in thick needs 1.36 cu yd with 10% waste. At $130 a yard, a $53 per yard short-load fee and $3.50 per sq ft labor, it costs about $598.52, or $5.99 per sq ft. Published installed prices run $6–12 per sq ft.

Concrete cost calculator at a glance: a 10 by 10 ft slab 4 in thick takes 1.36 cubic yards with waste, and at $130 a yard plus a $53 short-load fee and $3.50 per sq ft labor it costs about $598.
Concrete, fees and labor for a small slab.

How the concrete cost calculator works

The tool does what an estimator does on the back of a delivery ticket. It works out the volume, adds waste, prices the concrete and adds the supplier’s small-load charge. Then it adds labor and extras by the square foot. Every price box starts with a published figure for the country you picked, and you can edit every box. For a foundation or stem wall, get the wall volume from the concrete wall calculator first, then price it here.

  1. Area: length × width, in feet or meters.
  2. Volume: area × thickness. In US units, divide the thickness in inches by 12 to get feet, then divide cubic feet by 27 for cubic yards.
  3. Waste: multiply by 1.05, 1.10 or 1.15. The default is 10%, for uneven ground, spillage and the bit left in the chute.
  4. Concrete: ready-mix volume × price per cubic yard (or m³). For bags, the tool divides cubic feet by the bag yield and rounds up to whole bags.
  5. Short-load fee: if the order is below the supplier’s minimum, add the fee. US suppliers charge it on every yard ordered. Australian and German suppliers charge it on the part of the load you did not order.
  6. Labor and extras: price per sq ft × area for labor, base, reinforcement, excavation and removal. Delivery and pump are flat amounts.

Total = (L × W × T ÷ 27) × (1 + waste) × price + short-load fee + (labor + extras) × area + flat fees

Volume first, then price: L × W × T + wasteL 10 ftW 10 ftT 4 in10 × 10 = 100 sq ft× 4 ÷ 12 ft = 33.33 cu ft÷ 27 = 1.235 cu yd× 1.10 waste = 1.358 cu yd× $130 = $176.54Price the volume with waste:that is what the truck brings.
The default 10 × 10 ft slab. The truck brings the volume with waste, so that is what you pay for.

Under the result, the tool shows the published installed price for your country across the same area. For the US that is HomeGuide’s $6–12 per sq ft. If your total is well below that range, you have probably left something out, such as base or removal. If it is well above, check the short-load fee and the pump.

The calculator prices one load. A pour that needs two trucks may pay a short-load fee on the second truck, which the tool does not add. Ask your supplier how they bill the last part load. For the volume of an odd-shaped pour, use the concrete calculator first, then enter a rectangle with the same area and thickness here.

Think of it as a concrete estimate calculator, not a quote. It tells you what a fair price looks like, so you can spot a quote that is far off in either direction.

Concrete cost per cubic yard and per m³ in 2026

US price guides cluster around $110–150 per cubic yard for a standard mix delivered nearby. HomeGuide gives $119–147, including delivery up to 20 miles, and quotes the National Ready Mixed Concrete Association at $108 on average. Angi’s $130 is the calculator default. Its page was last updated in September 2022, so treat it as the low side of today’s market.

Public contracts are a useful reality check, because the prices are fixed for a year and published. Cleveland Metroparks pays $146 per cubic yard for 3,000 psi concrete without air entrainment in 2026, and $156–175 for 4,000 psi air-entrained mixes. In Oak Park, Illinois, two suppliers bid $174 and $180 for a 5-bag 3,000 psi mix. Those are city contracts with their own delivery terms, and they sit above the homeowner guide prices.

Prices also climb with strength. HomeGuide lists a 3,000 psi, 6-sack mix at $124 a yard, and Angi gives $100–115 for 3,000 psi. Higher strength, air entrainment for freeze–thaw areas, fibers and accelerators each add to the base price. Tell the plant what the slab is for and let them name the mix.

The BLS index is a trend, not a price

The Bureau of Labor Statistics tracks a producer price index for ready-mixed concrete (series WPU1333). It was 395.319 in September 2026 (preliminary) against 386.267 a year earlier. That is 395.319 ÷ 386.267 = 1.023, a rise of 2.3% year on year.

The index tells you which way prices are moving, not what a yard costs. If you hold a quote from last autumn, 2.3% more is a rough guide to where it might land now: $130 × 1.023 = $133. Your supplier’s current price list beats any index.

Installed concrete slab cost per square foot

Most people ask the cost per square foot, because that is how contractors quote. The published ranges are wide. HomeGuide gives $6–12 per sq ft installed and $6–8 for a plain 4 in slab. Forbes Home (Feb 2025) gives $4–8. HomeAdvisor puts the average at $6, within a $4–18 range.

The concrete is the smaller part. At 4 in thick, a square foot holds 1/3 cu ft, which is 0.0123 cu yd. With 10% waste at $130 a yard, that is 0.01358 × 130 = $1.77 per sq ft. Add $3.50 for labor and you are at $5.27. The calculator’s $5.99 for small slabs includes the short-load fee.

Labor is the biggest line on most slabs. HomeGuide gives $3–5 per sq ft and HomeAdvisor $2–3. BLS reports a median wage of $27.41 an hour for cement masons and concrete finishers (May 2025). A crew rate covers several people, the forms, tools, insurance and profit, so it is well above the wage.

Used as a cost of concrete per square foot calculator, the tool lets you change one thing at a time. Set labor to 0 to see the material cost alone, or tick removal to see what an old slab adds.

Concrete patio cost

A patio is a slab with a better finish and more care over drainage falls. HomeGuide gives $5–15 per sq ft installed for a concrete patio. That puts a 12 × 12 ft patio at 144 × $5 = $720 up to 144 × $15 = $2,160. A 12 × 20 ft patio is 240 sq ft, so $1,200–3,600. HomeStars gives the same $5–15 per sq ft for a poured patio in Calgary (the page does not name the currency).

Use the calculator for the plain slab, then add the finish. Broom finish is standard. Colored, exposed aggregate and stamped finishes push the price toward the top of those ranges. The concrete driveway cost calculator has a finish selector with published prices for each tier.

Ready-mix or bags: where the break-even is

An 80 lb bag of concrete mix yields about 0.60 cu ft (QUIKRETE’s data sheet). A cubic yard is 27 cu ft, so it takes 27 ÷ 0.60 = 45 bags. At $5 a bag that is $225 a yard, and at $6 it is $270. Angi gives bag prices of $4.50–27 depending on the mix, so check your store’s price for plain 80 lb concrete mix.

On paper, a short-loaded US truck at $130 + $53 = $183 a yard beats bags at almost any volume. In practice, small loads carry other charges. Cleveland Metroparks’ 2026 contract adds a flat charge per load ($165 under 2 yd, $150 under 4 yd), a $24 fuel surcharge and a $3 per yard environmental fee. The table shows both models.

Bags vs ready-mix by volume (waste included). Bag prices are examples; Angi gives $4.50–27 a bag.
Volume80 lb bagsBags at $5Bags at $6Truck, HomeGuide fee model ($183/yd³)Truck, Cleveland 2026 contract
0.25 yd³12$60$72$45.75$226.25
0.5 yd³23$115$138$91.50$263.50
1 yd³45$225$270$183$338
1.5 yd³68$340$408$274.50$412.50
2 yd³90$450$540$366$472
3 yd³135$675$810$549$621

How the contract column works: $146 + $3 = $149 per yard, plus the per-load charge and $24 fuel. For 1 yd that is 149 + 165 + 24 = $338. Bags at $5 match it at about 2.3 yd: 225 × V = 149 × V + 150 + 24 gives V = 174 ÷ 76 = 2.29 yd³. At $6 a bag the crossover drops to 189 ÷ 121 = 1.56 yd³.

Money is only half of it. Forty-five bags weigh 3,600 lb, and each one has to be lifted, mixed and placed before the first batch sets. Below about half a yard, bags are usually simpler. Above 2 yd, a truck saves a day of mixing. For a bag count on an odd shape, the cubic yards calculator turns any volume into yards and bags.

In the calculator, choose “Bags (mix on site)”, pick the bag size and type your store’s bag price. There is no reliable published bag price, so the calculator asks for yours before it shows a total.

Delivery, short-load and waiting-time fees

Fees are where a small pour gets expensive. A ready-mix truck costs the supplier about the same to send whether it carries 1 yard or 10, so suppliers recover that cost on small orders. Markets do it in two different ways, and the difference is large on a small job.

Per ordered yard (US). HomeGuide says anything less than a full truckload, which generally holds 10 cubic yards, adds $53 per cubic yard. Angi gives $40–60. The fee is charged on every yard you order, so the cost per yard stays flat at $183 until you reach a full load.

UK. MyBuilder says orders under 4 m³ often carry a surcharge of £30–60 per m³. It does not say whether that is per ordered or per missing m³. The calculator charges its £45 default on every m³ ordered, so ask your supplier and adjust.

Per missing unit (Australia, Germany). Holcim Melbourne charges $80 per m³ (ex GST) on the undelivered part of any load under 4 m³. Order 1 m³ and you pay for 3 missing m³. Heidelberg Materials in North Rhine-Westphalia and Holcim West charge €25 for each missing m³ below 7.5 m³ per truck. Holcim also adds €15 flat for loads up to 2 m³.

Cost per unit vs order size (each in its own currency)US: $53 on every yard below 10AU: A$80 per missing m³ below 4$0$100$200$0$500$100004812012345cubic yards orderedcubic metres ordered$183/yd³$130 full load1 m³: $650/m³2 m³: $490$410US: HomeGuide $53 fee on $130 (Angi). AU: Holcim Melbourne fee on $410 (Yellow Pages). Ex tax.
The US fee keeps the price per yard flat below a full load. The missing-part fee hits very small orders hardest.

The calculator applies the rule for the country you select. On a 1 m³ order in Australia, 1 × $410 + (4 − 1) × $80 = $650, so the concrete works out at $650 per m³. At 3 m³ it is (3 × 410 + 80) ÷ 3 = $436.67 per m³.

Waiting time. Trucks come with free unloading time, then charge by the minute. HomeGuide gives $3 a minute after 5 minutes. Cleveland Metroparks allows 30 minutes for 1–5 yd and 60 minutes for 5.25–10 yd, then $3 a minute. MyBuilder gives £2–3 a minute in the UK, and Holcim Melbourne $2.95 a minute after 30 minutes.

Distance and fuel. HomeGuide adds $9.50 a mile past 20 miles. Angi gives a fuel surcharge of $20–40 a load. Holcim Melbourne adds $2.85 per km per m³ past 20 km from the plant. In Germany, both price lists add a toll of €5–5.50 per m³ and a CO₂ surcharge of €5.50–11.50 per m³.

Type any flat delivery charge into the Delivery box. Waiting time is not in the calculator, so have the forms, crew and tools ready before the truck arrives.

What else adds to the cost: base, rebar, removal, excavation, pump

Concrete and labor give you a slab on ready ground. Real sites need prep, and the extras often add as much as the concrete. Tick each one in the calculator; the price box fills with the published figure for your country, where one exists.

Add-on costs, as published (each in its own currency, before tax)
ItemUSUKAustraliaSource and date
Gravel base / sub-base$1–3 per sq ft£6–16 per m² (100 mm)not publishedHomeGuide; MyBuilder
Rebar, installed$1–3 per sq ftnot publishednot publishedHomeGuide (driveway guide)
Mesh$0.30–2 per sq ft (with vapor barrier, foam)£3.50–6 per m² (material)$5–15 per m²Forbes Home, Feb 2025; MyBuilder; Yellow Pages, May 2026
Excavation / ground prep$1–5 per sq ft£30–70 per m²$20–35 per m²HomeGuide; MyJobQuote, Sep 2026; Yellow Pages
Grading only$0.40–2 per sq ftnot publishednot publishedHomeGuide
Remove old concrete$2–6 (Angi) or $3–8 with disposal (HomeGuide) per sq ft£20–50 per m²not publishedAngi, Sep 2022; HomeGuide; MyJobQuote
Formwork and finishingin laborin labor$10–30 per m²Yellow Pages
Pumpabout $900 a job; boom $140–190 an hour, 4–5 hr minimumline £280–300, boom £550–800 a day$500–1,500 a jobForbes Home; HomeGuide; Checkatrade, Jul 2024; Yellow Pages

Base. A compacted gravel base gives the slab even support and drainage. If you buy the stone yourself, the gravel calculator works out the tons for your depth.

Reinforcement. Rebar or mesh controls cracking. It does not stop it. Code and your engineer decide what a structural slab needs. On a 10 × 10 slab, rebar at $1–3 per sq ft adds $100–300.

Removal. Breaking out an old slab is heavy, slow work, and disposal is often billed by weight. HomeGuide’s $3–8 per sq ft includes disposal, which makes it the safer figure for a budget.

Excavation. Digging down to fit the base and slab is a separate job from grading a site that is nearly level. HomeGuide gives $1–5 per sq ft for excavation and $0.40–2 for grading alone. Pick the one that fits your site.

Pump. You need one when the truck can’t reach the pour, for example in a back yard. HomeGuide lists a trailer-mounted pump at $15 per cubic yard with a $125 minimum for small residential jobs. That is far cheaper than a boom pump at $140–190 an hour.

Concrete slab cost by size (10×10 to 40×60)

Most people price a slab by its size: a 10 × 10 shed base, a 20 × 20 garage pad, a 30 × 40 shop floor. The calculator above works as a concrete slab cost calculator, and this table gives the concrete slab cost for each common size at 4 in and 6 in thick.

Every number comes from the calculator above with its US defaults, so you can open any row and change the prices: 10% waste, ready-mix at $130 per cubic yard, a $53 per yard short-load fee below a full 10 yd truck, and labor at $3.50 per sq ft. No base, rebar or removal is included.

Concrete slab cost by size, 4 in and 6 in thick (US calculator defaults, before tax; generated by the calculator’s engine)
SizeArea4 in: concrete4 in: total4 in: per sq ft6 in: concrete6 in: total6 in: per sq ftHomeGuide $6–12/sq ft
10 × 10 ft100 sq ft1.36 yd³$598.52$5.992.04 yd³$722.78$7.23$600–1,200
12 × 12 ft144 sq ft1.96 yd³$861.87$5.992.93 yd³$1,040.80$7.23$864–1,728
12 × 20 ft240 sq ft3.26 yd³$1,436.44$5.994.89 yd³$1,734.67$7.23$1,440–2,880
16 × 20 ft320 sq ft4.35 yd³$1,915.26$5.996.52 yd³$2,312.89$7.23$1,920–3,840
20 × 20 ft400 sq ft5.43 yd³$2,394.07$5.998.15 yd³$2,891.11$7.23$2,400–4,800
24 × 24 ft576 sq ft7.82 yd³$3,447.47$5.9911.73 yd³$3,541.33$6.15$3,456–6,912
20 × 30 ft600 sq ft8.15 yd³$3,591.11$5.9912.22 yd³$3,688.89$6.15$3,600–7,200
30 × 30 ft900 sq ft12.22 yd³$4,738.89$5.2718.33 yd³$5,533.33$6.15$5,400–10,800
30 × 40 ft1,200 sq ft16.30 yd³$6,318.52$5.2724.44 yd³$7,377.78$6.15$7,200–14,400
40 × 40 ft1,600 sq ft21.73 yd³$8,424.69$5.2732.59 yd³$9,837.04$6.15$9,600–19,200
40 × 60 ft2,400 sq ft32.59 yd³$12,637.04$5.2748.89 yd³$14,755.56$6.15$14,400–28,800

Each size links to the calculator with that size and 4 in already filled in. Change the thickness, the prices or the extras and the total updates.

The concrete column is area × thickness ÷ 12 ÷ 27 × 1.10. For a 20 × 20 slab at 6 in that is 400 × 0.5 ÷ 27 × 1.10 = 8.15 yd³. Below 10 yd³ the short-load fee applies, so the concrete costs 8.15 × ($130 + $53) = $1,491.11. Add 400 × $3.50 = $1,400 of labor and you get $2,891.11.

Why the price per sq ft drops. Look down the per sq ft columns. Every slab under 10 yd³ costs the same per sq ft, because the fee is charged on every yard. Once the order reaches a full truck, the fee goes and the price per sq ft falls.

At 4 in that happens between 24 × 24 and 30 × 30. At 6 in it happens sooner, so a 24 × 24 slab at 6 in costs only $93.87 more than at 4 in.

Big slabs need several trucks. A 40 × 60 slab at 6 in takes 48.89 yd³, which is 5 truckloads of about 10 yd³. The calculator prices the whole order as one, so it does not add a short-load fee on a part-filled last truck. On a 30 × 30 slab at 4 in, the second truck carries 2.22 yd³. If the plant short-loads it, add about 2.22 × $53 = $117.78. Ask before you book.

The HomeGuide column is the published installed price for the same area. The calculator defaults sit at or below the bottom of it, which is normal. They leave out base, reinforcement, forms and the contractor’s minimum charge. HomeGuide gives $6–8 per sq ft for a plain 4 in slab, and the 4 in totals here run $5.27–$5.99 per sq ft.

Worked example: cost of a 30x30 concrete slab 4 inches thick

HomeGuide and other cost guides use a 30 × 30 ft slab as their reference, so here it is step by step with the calculator defaults.

30 × 30 ft, 4 in, +10%. Area 900 sq ft. Volume 900 × 4 ÷ 12 = 300 cu ft ÷ 27 = 11.11 cu yd, × 1.10 = 12.22 cu yd. That is over a full 10 yd truck, so no short-load fee. Concrete: 12.22 × $130 = $1,588.89. Labor: 900 × $3.50 = $3,150.00. Total $4,738.89, or $5.27 per sq ft.

Add base and rebar. Tick gravel base ($2 per sq ft default) and it adds $1,800, for $6,538.89. Tick rebar too ($2 default) for $8,338.89, or $9.27 per sq ft.

With base and rebar the slab lands inside HomeGuide’s $5,400–10,800 range for 900 sq ft ($6–12 per sq ft). Without them it sits below the range, which tells you those items belong in the budget.

4 inch vs 6 inch slab cost

Thickness drives the concrete, but not the labor, so a thicker slab costs less extra than you might expect. A 4 in slab is the usual choice for patios, walks and shed bases. Garage and shop floors that take vehicles are often 5 or 6 in, and heavy equipment may need 8 in. Your engineer or local code sets the thickness for a structural slab. This table shows what each option costs with the calculator defaults.

Slab cost per sq ft by thickness (US calculator defaults, generated by the calculator’s engine)
ThicknessConcrete per 100 sq ft10 × 10 ft total10 × 10 per sq ft30 × 30 ft total30 × 30 per sq ft
4 in1.36 yd³$598.52$5.99$4,738.89$5.27
5 in1.70 yd³$660.65$6.61$5,136.11$5.71
6 in2.04 yd³$722.78$7.23$5,533.33$6.15
8 in2.72 yd³$847.04$8.47$6,327.78$7.03

On the 30 × 30 slab, going from 4 in to 6 in adds $794.44. That is 17% more money for 50% more concrete, because the $3,150.00 of labor stays the same in the calculator. In practice a crew may charge a bit more for a thicker pour, with deeper forms and more concrete to place, so ask for both prices on the same quote.

HomeGuide gives $6–8 per sq ft for a plain 4 in slab. CalcWall could not re-read its figures for other thicknesses on 13 Nov 2026, so the table shows only the calculator’s own result. Type your local labor rate into the labor box.

Slab cost: DIY vs pro

Labor is the biggest single line on most slabs. To see the cost to pour a concrete slab yourself, set labor to 0 in the calculator. A 10 × 10 slab at 4 in drops from $598.52 to $248.52 for the delivered concrete. A 30 × 30 slab drops from $4,738.89 to $1,588.89.

That saving is real, but so is the work. A truck of concrete has to be placed, screeded, floated and finished before it sets. You also need forms, a compacted base, tools and a few helpers. Most homeowners can manage a small pad with bags, or a short load with two or three helpers. Above a few yards, a finishing crew usually pays for itself in a flatter, longer-lasting surface.

  • Pad or shed base under about 1 yd³: bags or a short load. Pick “Bags” in the calculator and enter your store’s bag price.
  • Patio or garage pad, 2–10 yd³: ready-mix, placed by a pro or an experienced crew, as the truck sets the pace.
  • Shop or barn floor, over 10 yd³: several trucks, often a pump, and a slab specified by an engineer.

Whatever you choose, the slab needs the same prep. Use the rebar calculator for the bar count and spacing. If you came looking for a 12x20 concrete slab cost calculator, enter 12 and 20 above. The default $1,436.44 sits at the bottom of HomeGuide’s $1,440–2,880, because the defaults leave out base, reinforcement and the contractor’s minimum charge.

Concrete cost by country and US state

The calculator uses the published prices below as its defaults. Each stays in the currency and unit its source uses. CalcWall never converts between currencies, because exchange rates say little about local building costs. Where a market has no reliable source, the box is left empty for your quote.

Ready-mix price and installed slab price by market, as published
MarketReady-mix (low–high, typical)Short-load ruleInstalled slabSource and date
United States$110–150 per yd³, $130$53 per ordered yd³ below a full 10 yd³ truck$6–12 per sq ftAngi, Sep 2022; HomeGuide, undated, read Nov 2026
United Kingdom£100–160 per m³, £120£30–60 per m³ below 4 m³ (calculator uses £45)£65–85 per m² (reinforced £90–120)Checkatrade, Jul 2024; MyBuilder, undated
Canada$120–160 per yd³ (CAD)not published$5–10 per sq ft (CAD)HomeStars, Aug 2026 (single publisher)
Australia$400–450 per m³, $410 for 25 MPa (AUD)$80 per missing m³ below 4 m³, ex GST$65–85 per m² (AUD)Yellow Pages, Apr 2026; Holcim Melbourne, May 2026; Airtasker, Nov 2026
New Zealandno published price foundnot published$50–70 per m²Airtasker NZ, Oct 2026
Germany€201.50–218 per m³ net, €213 for C25/30€25 per missing m³ below 7.5 m³€90–130 per m² (house slab, no earthworks)Heidelberg Materials NRW, from Oct 2025; Holcim West, from Jan 2026; Hausjournal, Jun 2022

United Kingdom. MyBuilder gives C20/C25 at £105–110 and C30/C35 at £110–115 per m³. Its regional ranges run from £90–110 in the North and North East to £110–130 in London and the South East, and £100–140 in Scotland. Checkatrade says delivery can cost £100–200, though many suppliers deliver a full load free. Labor on a slab runs £15–25 per m² or £20–35 an hour (MyBuilder).

Canada. All the Canadian figures here come from one publisher, HomeStars. CalcWall could not find a second independent source, so treat them as a single estimate. HomeStars gives labor at $3–8 per sq ft and a Calgary slab at $6–12. No Canadian short-load fee is published, so ask your plant. Prices are before GST/HST.

Australia. Yellow Pages lists 20 MPa at $400, 25 MPa at $410, 32 MPa at $430 and 40 MPa at $450 per m³. Airtasker gives concreter labor at $20–55 per m², and the calculator uses the $37.50 midpoint. Most prices are ex GST.

New Zealand. No supplier or price guide CalcWall could verify publishes a ready-mix price per m³. Firth publishes a $9.90 per m³ fuel surcharge on certified concrete, but that is a fee, not a price. The only installed figure is Airtasker NZ’s $50–70 per m² for a slab, and the page does not name the currency. Enter your supplier’s quote in the price box.

Germany. The big suppliers publish real price lists. Heidelberg Materials NRW lists C20/25 at €208, C25/30 at €213 and C30/37 at €218 per m³ net, including a €25 freight share within 15 km. Holcim West lists C25/30 at €201.50–207.50. Both are before 19% VAT. CalcWall found no reliable published labor rate per m² for slab work, so that box starts empty. The Hausjournal slab figure dates from 2022.

US state examples

HomeAdvisor publishes installed slab prices by state. Costs follow local wages and plant prices, so the spread is wide. The 10 × 10 and 20 × 20 columns are the per-sq-ft range × 100 and × 400.

Installed slab cost by state (HomeAdvisor, undated, title says 2025, read Nov 2026)
StatePer sq ft10 × 10 ft (100 sq ft)20 × 20 ft (400 sq ft)
California$7.67–8.53$767–853$3,068–3,412
New York$6.67–8.53$667–853$2,668–3,412
Maine$6.73–7.49$673–749$2,692–2,996
Florida$5.89–6.56$589–656$2,356–2,624
Texas$5.31–5.90$531–590$2,124–2,360

To match a state figure, change the labor box until the cost per sq ft lines up. In Texas, the default $5.99 is already a little above the state range. In California, the default is about $1.70–2.50 per sq ft below it.

Worked examples

These match the calculator exactly with the default prices. Enter the same numbers to check.

US, 10 × 10 ft, 4 in, +10%. 100 × 4 ÷ 12 = 33.33 cu ft ÷ 27 = 1.235 cu yd, × 1.10 = 1.358 cu yd. Concrete: 1.358 × $130 = $176.54. Short load (under 10 yd): 1.358 × $53 = $71.98. Labor: 100 × $3.50 = $350.00. Total $598.52, or $5.99 per sq ft.

Where $598.52 goes on a 10 × 10 ft slab4 in thick, +10% waste, $130/yd³, $53/yd³ short load, $3.50/sq ft labor$176.54$71.98$350.00Ready-mix, 1.36 yd³Short-load feeLabor, 100 sq ft × $3.50Total $598.52 = $5.99 per sq ft
Labor is more than half the bill. The short-load fee adds about 41% to the concrete itself ($71.98 ÷ $176.54).

US, 20 × 20 ft garage pad, 4 in, +10%. 400 × 4 ÷ 12 = 133.33 cu ft ÷ 27 = 4.938 cu yd, × 1.10 = 5.432 cu yd. Concrete: 5.432 × $130 = $706.17. Short load: 5.432 × $53 = $287.90. Labor: 400 × $3.50 = $1,400. Total $2,394.07. Tick gravel base at the $2 per sq ft default and it adds $800, for $3,194.07.

Australia, 3 × 3 m, 10 cm, +10%. 9 m² × 0.10 m = 0.90 m³, × 1.10 = 0.99 m³. Concrete: 0.99 × $410 = $405.90. Short load (missing part of 4 m³): (4 − 0.99) × $80 = $240.80. Labor: 9 × $37.50 = $337.50. Total A$984.20, or $109.36 per m², ex GST.

The Australian slab costs well above the published $65–85 per m², and the short-load fee is why. On a slab this small, share a load with a neighbour’s job or ask the plant for a part-load price.

Germany, 3 × 3 m, 10 cm, +10%. 0.99 m³ × €213 = €210.87. Short load: (7.5 − 0.99) × €25 = €162.75. No labor default. Total €373.62 net for the concrete delivered, before toll, CO₂ surcharge and 19% VAT.

US, bags, 4 × 4 ft pad, 4 in, +10%. 16 × 4 ÷ 12 = 5.333 cu ft × 1.10 = 5.867 cu ft ÷ 0.60 = 9.78, so 10 bags of 80 lb. At a $6 shelf price that is $60, with labor set to 0.

Used as a concrete pad cost calculator, the last example is the one to copy for shed bases, AC pads and post footings. For anything over about a yard, rerun it with the truck.

Notes for contractors

Quote the fee rule. Ask the plant whether its small-load fee is per ordered yard or per missing yard. On a 1 m³ job the difference is hundreds.

Count the trucks. The calculator prices one load. A 12 yd pour is a full truck plus a 2 yd part load at many plants.

Use the range check. If your total sits below the published installed range, you have probably left out base, forms or removal.

Date your prices. The US $130 default comes from a 2022 page. The BLS index rose 2.3% in the year to Sep 2026. Use this week’s plant price.

For block walls or footings next to the slab, the concrete block calculator counts blocks, mortar and core fill. Figures for thickness, reinforcement and base on this page are a guide. Local code and your engineer decide what a structural slab needs.

Sources

Where the numbers on this page come from. Everything else is plain geometry and unit conversion, which the calculator does with exact factors.

  • How Much Does Concrete Cost Per Yard?, HomeGuide, undated (title says 2026), read Nov 2026. Used for: ready-mix at $119–147 per cu yd delivered within 20 miles, 3,000 psi 6-sack mix at $124, the $53 per cu yd short-load fee, a full truck of about 10 cu yd, $9.50 per mile past 20 miles, $3 a minute standby, boom pump $140–190 an hour with a 4–5 hour minimum, trailer pump $15 per cu yd with a $125 minimum, and the NRMCA $108 average it quotes
  • Concrete Slab Cost, HomeGuide, undated (title says 2026), read Nov 2026. Used for: installed slab $6–12 per sq ft ($6–8 at 4 in), patio $5–15 per sq ft, labor $3–5 per sq ft, gravel base $1–3, grading $0.40–2, removal $3–8 per sq ft with disposal
  • Concrete Driveway Cost, HomeGuide, undated (title says 2026), read Nov 2026. Used for: rebar installed at $1–3 per sq ft and excavation at $1–5 per sq ft
  • How Much Does It Cost to Deliver Concrete?, Angi, updated Sep 2022. Used for: ready-mix about $130 per cu yd ($110–150), the calculator’s US default; 3,000 psi at $100–115; short-load fee $40–60 per cu yd; fuel surcharge $20–40 per load; bags $4.50–27; removal $2–6 per sq ft
  • Concrete Slab Cost, HomeAdvisor, undated (title says 2025), read Nov 2026. Used for: average slab $6 per sq ft (range $4–18), labor $2–3 per sq ft, and the state ranges for California, New York, Maine, Florida and Texas
  • Concrete Slab Cost, Forbes Home, updated Feb 2025. Used for: slab with labor $4–8 per sq ft, vapor barrier, foam and wire mesh $0.30–2 per sq ft, and a pump at around $900
  • Concrete Pricing 2026 (ready-mix contract), Cleveland Metroparks, contract period 1 Jan – 31 Dec 2026. Used for: 3,000 psi at $146 and 4,000 psi air-entrained at $156–175 per cu yd, the small-load charges per load ($165 under 2 yd, $150 under 4 yd), the $3 per cu yd environmental fee, the $24 fuel surcharge, and free unloading time then $3 a minute
  • Concrete pricing sheet 2026, bid tabulation (Bid 26-109), Village of Oak Park, Illinois, 2026. Used for: 5-bag (3,000 psi) mix bids of $174 and $180 per cu yd
  • PPI Commodity data: Ready-mixed concrete (WPU1333), not seasonally adjusted, U.S. Bureau of Labor Statistics, Sep 2026 index (preliminary), read Nov 2026. Used for: the index of 395.319 for Sep 2026 against 386.267 for Sep 2025, a 2.3% rise
  • Occupational Employment and Wages, May 2025, U.S. Bureau of Labor Statistics, May 2025 OEWS. Used for: cement masons and concrete finishers: median wage $27.41 an hour
  • Concrete Mix No. 1101 product data sheet, QUIKRETE, revised October 2022. Used for: bag yields: 80 lb about 0.60 cu ft, 60 lb about 0.45 cu ft, 40 lb about 0.30 cu ft
  • Ready Mix Concrete Cost, Checkatrade, updated Jul 2024. Used for: UK ready-mix £100–160 per m³ (£120 typical), delivery £100–200, line pump £280–300 and boom pump £550–800 a day
  • Ready Mix Concrete Cost, MyBuilder, undated (title says 2026), read Nov 2026. Used for: C20/C25 £105–110 and C30/C35 £110–115 per m³, regional ranges, the £30–60 per m³ surcharge under 4 m³ and £2–3 a minute waiting
  • Concrete Slab Cost, MyBuilder, undated (title says 2026), read Nov 2026. Used for: UK slab £65–85 per m², reinforced £90–120, shed base £40–80, labor £15–25 per m² or £20–35 an hour, sub-base £6–16 per m², mesh £3.50–6 per m²
  • Cost of Pouring Concrete, MyJobQuote, Sep 2026. Used for: UK removal of an old surface £20–50 per m² and ground preparation £30–70 per m²
  • Concrete Slab Cost, HomeStars, Aug 2026. Used for: Canada ready-mix $120–160 per cu yd, slab $5–10 per sq ft, labor $3–8, rebar $0.75–1.50 and mesh $0.30–0.60 per sq ft
  • Concrete Contractor Cost in Calgary, HomeStars, Aug 2026. Used for: Calgary basic slab $6–12 and poured patio $5–15 per sq ft
  • How much is concrete per cubic metre?, Yellow Pages Australia, Apr 2026. Used for: Australian ready-mix $400–450 per m³ (20 MPa $400, 25 MPa $410, 32 MPa $430, 40 MPa $450)
  • How much does a concrete slab cost?, Yellow Pages Australia, May 2026. Used for: mesh $5–15, excavation $20–35, formwork and finishing $10–30 per m², pumping $500–1,500 a job
  • Service fees, Melbourne Metro, Holcim (Australia), effective 1 May 2026. Used for: the $80 per undelivered m³ fee on loads under 4 m³, waiting time of $2.95 a minute after 30 minutes and extra cartage of $2.85 per km per m³ past 20 km, all ex GST
  • Concreting services, Airtasker (Australia), Nov 2026. Used for: plain slab $65–85 per m² and concreter labor $20–55 per m²
  • Concreting services, Airtasker (New Zealand), Oct 2026. Used for: New Zealand slab $50–70 per m²
  • Temporary fuel surcharge, Firth Industries, page read Nov 2026. Used for: the $9.90 per m³ fuel surcharge on certified concrete (a fee, not a concrete price)
  • Preisliste Transportbeton Nordrhein-Westfalen 2026, Heidelberg Materials Beton DE, valid from 1 Oct 2025. Used for: C20/25 €208, C25/30 €213 and C30/37 €218 per m³ net (with a €25 freight share within 15 km), €25 per missing m³ below 7.5 m³, toll €5 and CO₂ surcharge €5.50–11.50 per m³
  • Preisliste West 2026, Holcim (Deutschland), valid from 1 Jan 2026. Used for: C25/30 €201.50–207.50 per m³ net, €25 per missing m³ below 7.5 m³ plus €15 flat up to 2 m³, toll €5.50 and CO₂ €6 per m³
  • Bodenplatte: Kosten pro Quadratmeter, Hausjournal, updated Jun 2022. Used for: house slab €90–130 per m² without earthworks
  • NIST Handbook 44, Appendix C: General Tables of Units of Measurement, National Institute of Standards and Technology, 2026 edition. Used for: 1 cu yd = 27 cu ft, 1 ft = 12 in, and the exact factors behind 1 cu yd = 0.764555 m³ and 1 sq ft = 0.092903 m²

Frequently asked questions

How much does a yard of concrete cost?

HomeGuide (undated, read Nov 2026) puts delivered ready-mix at $119–147 per cubic yard within 20 miles. Angi (updated Sep 2022) gives $110–150, about $130, which is the calculator’s US default. Public 2026 contracts run higher: Cleveland Metroparks pays $146 for 3,000 psi and Oak Park, Illinois, received bids of $174 and $180. Short loads cost more per yard.

How much does a 10×10 concrete slab cost?

The calculator’s default run for a 10 × 10 ft slab 4 in thick comes to $598.52: 1.36 cu yd of ready-mix at $130 ($176.54), a $53 per yard short-load fee ($71.98) and labor at $3.50 per sq ft ($350). HomeGuide’s $6–12 per sq ft installed gives $600–1,200 for the same 100 sq ft.

How much does a 20×20 slab cost?

A 20 × 20 ft slab is 400 sq ft. At HomeGuide’s $6–12 per sq ft that is $2,400–4,800, and at Forbes Home’s $4–8 it is $1,600–3,200. With the calculator defaults (4 in, 10% waste, $130 per yard, short-load fee, $3.50 labor) it comes to $2,394.07 for 5.43 cu yd.

Is it cheaper to mix concrete yourself?

For a small pour, often yes. A cubic yard takes 45 bags of 80 lb (27 ÷ 0.60 cu ft), so at $5 a bag the concrete costs $225 a yard, against $183 for a short-loaded truck on paper. But real small loads carry per-load charges. On Cleveland Metroparks’ 2026 contract, 1 yd costs $338 delivered, so bags at $5 stay cheaper up to about 2.3 yd.

What is a short-load fee and how do I avoid it?

It is what a supplier adds when you order less than a full truck. HomeGuide gives $53 on every yard of a short load in the US. Holcim in Melbourne and the big German suppliers charge only on the missing part of the minimum load. You avoid it by ordering a full load, sharing a truck with another pour, or using bags for very small jobs.

How much is concrete labor per square foot?

HomeGuide gives $3–5 per sq ft for a slab and HomeAdvisor $2–3. The calculator uses $3.50 in the US. For context, BLS puts the median wage of cement masons and concrete finishers at $27.41 an hour (May 2025), before the contractor’s overhead and profit. Enter 0 if you place and finish it yourself.

How much does rebar or mesh add?

HomeGuide gives $1–3 per sq ft for rebar installed, so $100–300 on a 10 × 10 slab. Forbes Home gives $0.30–2 per sq ft for wire mesh, vapor barrier and foam. In Canada, HomeStars lists rebar at $0.75–1.50 and mesh at $0.30–0.60 per sq ft. Tick Reinforcement in the calculator to add it.

How much does concrete cost in the UK, Canada or Australia?

UK: £100–160 per m³ (Checkatrade, Jul 2024; MyBuilder). Canada: $120–160 per cubic yard (HomeStars, Aug 2026, the only Canadian source found). Australia: $400–450 per m³, with 25 MPa about $410 (Yellow Pages, Apr 2026). Each figure is in its own currency and before local tax unless the source says otherwise.

Why do quotes vary so much?

Access, distance and small-load rules move the price more than the concrete itself. A pump can add about $900 (Forbes Home). Delivery past 20 miles is $9.50 a mile and standby $3 a minute (HomeGuide). Prep varies too: removal, digging and base can each add $1–8 per sq ft. Location matters as well: HomeAdvisor lists California at $7.67–8.53 per sq ft and Texas at $5.31–5.90.

Is a 4 or 6 inch slab cheaper per square foot?

A 4 in slab is always cheaper, but by less than you might think, because labor does not grow with thickness. With the calculator defaults a 30 × 30 ft slab costs $5.27 per sq ft at 4 in and $6.15 at 6 in, about 17% more for 50% more concrete. On a small 10 × 10 slab it is $5.99 against $7.23.

How much does a 30x40 concrete slab cost?

A 30 × 40 ft slab is 1,200 sq ft. With the calculator defaults it comes to $6,318.52 at 4 in (16.30 cu yd) and $7,377.78 at 6 in (24.44 cu yd), before base and rebar. HomeGuide’s $6–12 per sq ft installed gives $7,200–14,400.

How much does a 40x60 concrete slab cost?

A 40 × 60 ft slab is 2,400 sq ft, a typical shop or barn floor. The calculator defaults give $12,637.04 at 4 in and $14,755.56 at 6 in, for 48.89 cu yd, which is 5 truckloads. HomeGuide’s $6–12 per sq ft gives $14,400–28,800. A slab this size usually needs base, reinforcement and an engineer’s spec.

Does a slab need rebar?

Not every slab. Many patios and walks are poured with wire mesh or fibers, and some with nothing. Garage, shop and driveway slabs usually get rebar or mesh to hold cracks tight. Local code and your engineer decide for a structural slab. Budget $1–3 per sq ft installed for rebar (HomeGuide), and use the rebar calculator for the bar count.

How much does a concrete pad cost?

Use the slab method. A 12 × 12 ft pad 4 in thick comes to $861.87 with the US defaults, for 1.96 cu yd. HomeGuide’s $6–12 per sq ft gives $864–1,728. In the UK, MyBuilder gives £40–80 per m² for a light garden or shed base. Small pads under about a yard are where bags start to make sense.

How much does concrete cost per square foot?

Installed, HomeGuide gives $6–12 per sq ft ($6–8 for a 4 in slab), Forbes Home $4–8 and HomeAdvisor an average of $6. The concrete alone at 4 in is about $1.77 per sq ft at $130 a yard with 10% waste, before any short-load fee. The rest is labor, prep and overhead.

How much concrete fits in one truck?

HomeGuide says a full truckload generally holds 10 cubic yards. Suppliers also set their own minimum for a full-price load: Holcim Melbourne charges below 4 m³, and Heidelberg Materials and Holcim in Germany below 7.5 m³ per truck. If your pour needs more than one truck, ask how the last part load is charged.

How much does concrete cost in Germany or New Zealand?

Germany: Heidelberg Materials NRW lists C25/30 at €213 per m³ net and Holcim West €201.50–207.50, both plus 19% VAT, toll and CO₂ surcharges. New Zealand: CalcWall found no published ready-mix price per m³. Airtasker NZ (Oct 2026) gives $50–70 per m² for a slab, so enter your supplier’s price in the calculator.

How much does a concrete patio cost?

HomeGuide gives $5–15 per sq ft installed for a concrete patio, so a 12 × 12 ft patio is $720–2,160 and a 12 × 20 ft patio $1,200–3,600. HomeStars gives $5–15 per sq ft for a poured patio in Calgary. Stamped or colored finishes sit at the top of those ranges.

Is this concrete cost calculator free to use online?

Yes. The CalcWall Concrete Cost Calculator is completely free and works online in any browser, on a phone, tablet or computer. There is nothing to download and no account to create, and the math runs right in your browser, so results appear as you type.

All Concrete calculators →

Used in these projects:Cost estimators calculators

Last updated ·How we calculate · Results are estimates; confirm quantities with your supplier.