Polished Concrete Floor Cost Calculator

Price a polished floor before you call for quotes. This polished concrete floor cost calculator multiplies your area by published prices for each finish level in your country, in your own currency, and shows the source and date of each figure. This free online polished concrete floor cost calculator works on any phone or computer, with no sign-up or download.

Jump to:How it worksFinish levelsSheen and gritBy countryExamplesFAQ

Your result

Estimated cost

—

Your numbers in 3D · changes as you typeOpen full designer ↗

Quick answer: HomeGuide puts US polished concrete at $3–12 per sq ft for basic finishes. The calculator’s default 20 × 25 ft floor (500 sq ft) at the salt-and-pepper tier, $4–10 per sq ft, comes to $3,500 at the midpoint, within $2,000–5,000. Polishing a sound existing slab can cost $3–5 per sq ft.

Polished concrete floor cost calculator at a glance: a 500 sq ft salt and pepper polished floor at HomeGuide's $4 to $10 per sq ft costs $2,000 to $5,000, with $3,500 in the middle.
Three grind levels, from cream to exposed stone.

How to use the polished concrete floor cost calculator

The tool does one job well. It takes the floor area and multiplies it by a published installed price for the finish you pick. It shows the low, middle and high figure, the price per square foot or square metre, and the publisher and date behind it. If you have a quote, type its rate and the tool uses that instead.

  1. Measure the floor. Enter length and width in feet or metres. For an L-shaped room, split it into rectangles, run each one and add the totals.
  2. Pick the finish level. Light, medium or full grind, or the existing-floor or new-floor option where your market publishes one. The tiers section below explains what each level means in your country.
  3. Read the range. The big number is the middle of the published range. The line below gives the low and high total.
  4. Add your own price. When a contractor quotes a rate per sq ft or m², enter it to see the total at that rate.
  5. Add what the tool leaves out. Dye, crack repair, coating removal and poor access are separate. The prep and densifier sections give dated prices for each.

Cost = length × width × price per unit area (low; middle = (low + high) ÷ 2; high)

Where a source gives one typical figure instead of a range, such as Airtasker UK’s £40 per m² for honed concrete, the low, middle and high are the same number. Where a source gives a range, the middle is a plain average. It is not a weighted figure or a survey median.

Prices stay in the source’s own unit and currency. A US price is per square foot in dollars, so if you enter metres the tool converts the area, not the price. CalcWall never converts between currencies. If you switch country, any price you typed is cleared, because it belonged to the old currency.

If an option shows “(no published price here)”, CalcWall found no reliable figure for that finish in that market. The tool then asks for your own rate. That happens for every finish in Canada, for medium in New Zealand and for light and medium in Germany.

Polished concrete floor cost per square foot in 2026

US price guides agree on the shape and disagree on the edges. HomeGuide gives $3–12 per sq ft for basic finishes. HomeAdvisor says most jobs cost $2–16. This Old House (updated April 2026) gives $3–15, and $2–6 for a simple polish with no add-ons. Bob Vila’s $2–8 for a basic floor dates from November 2022.

The spread is mostly about how much grinding the floor gets. A light grind on a flat, sound slab takes a crew a few passes. Full aggregate exposure takes coarse metal-bond passes to cut into the stone, then every resin step after it. This Old House says labour is about two-thirds of the budget, so each extra pass shows up directly in the price.

US polished concrete prices per sq ft by finish (published estimates)
FinishHomeGuide (undated, read Nov 2026)Airtasker US (3 Jun 2025)Calculator tier
Cream$3–8$4–7Light
Salt and pepper$4–10$3–8Medium
Rock cut / full or exposed aggregate$6–12$7–15Full
Polishing an existing floornot given$3–5Existing
Basic finishes, overall$3–12not givennone

The calculator uses HomeGuide for the three US tiers because it gives all three on one page with one method. Airtasker’s figures overlap but run lower for salt and pepper and higher for full aggregate. Neither page pins its prices to 2026, so check them against a local quote.

Small rooms cost more per unit area. The crew, the machines and the set-up are the same for a bathroom and a living room. Checkatrade’s UK examples show it: about £2,700 for a 20 m² room is £135 per m², while £4,800 for 40 m² is £120 per m². The calculator uses a flat rate, so expect a small job to quote above its range.

One widely read guide needs care. Bob Vila’s 2022 article gives a $6,000 example for 200 sq ft, which is $30 per sq ft and well above its own headline range. It also names the contractors’ body “ACSS”. The body is the American Society of Concrete Contractors, ASCC, whose Concrete Polishing Council now publishes the finish definitions used on this page.

Cream, salt-and-pepper or exposed aggregate: the three tiers

Every market names finishes in its own way. US guides talk about exposure: cream, salt and pepper, exposed aggregate. UK and Australian guides talk about process: grind and seal, honed, mechanically polished. The calculator maps both onto three tiers by how much grinding they need.

Three tiers, three vocabulariesUS (HomeGuide)UK (Airtasker)AU (Yellow Pages)LightCream$3–8 /sq ftGrind and seal£26 /m²Grind and seal$60–70 /m²MediumSalt and pepper$4–10 /sq ftHoned£40 /m²Honed$80–90 /m²FullExposed aggregate$6–12 /sq ftMechanical polish£60 /m²Mech. polished$100–120 /m²NZ: light and full only (+ GST). Germany: full only. Canada: no direct figure.Each price in its own currency and unit. Never converted.
Each market’s own finish names, and the tier the calculator files them under.
  • Light is a cream finish in the US, or grind and seal in the UK, Australia and New Zealand. The grinder takes off the surface skin and a sealer goes on. Little or no stone shows.
  • Medium is salt and pepper in the US, or honed concrete in the UK and Australia. The cut reaches the sand and fine stone. A honed floor is usually satin rather than glossy.
  • Full is rock cut or exposed aggregate in the US, or a mechanical polish in the UK, Australia and New Zealand. It is the most grinding and the most resin steps.

The mapping is not perfect, and you should know where it bends. In the UK and Australia, “mechanical polish” describes the process and sheen, not the depth of cut. A mechanically polished floor can still be cream. US “exposed aggregate” is about depth and says nothing of sheen. The tiers line up on effort and price, which is what the tool needs, but read your quote for both depth and sheen.

Two more options appear where a market prices them. Existing floor uses Airtasker US’s $3–5 per sq ft for polishing a slab that is already down. New floor uses Checkatrade’s £120–150 per m² for a UK floor poured, finished and sealed. No other market in the research has a clean figure for either in the calculator, so the options say so there.

Deeper grind, more stone on showCreamCPC Class A85–95% cement finesleast grindingSalt and pepperCPC Class B85–95% fine aggregatemedium cutFull aggregateCPC Class C80–90% coarse stonedeepest cutDashed band: concrete ground away. Gold line: the finished floor.Surface shares from the ASCC Concrete Polishing Council exposure chart (2-2024).
The tiers are about depth of cut. A deeper grind slices through more stone.

The ASCC Concrete Polishing Council’s exposure chart (2-2024) defines three classes by what you see. Class A, cream, is 85–95% cement fines. Class B, salt and pepper, is 85–95% fine aggregate. Class C, full exposure, is 80–90% coarse aggregate. The shares are judged inside a random 10 × 10 ft square, and the chart asks for a mock-up for approval. Older guides, including ConcreteNetwork, still use a four-class A–D scheme from the earlier CPAA chart.

Depth matters for another reason. Full exposure needs stone close to the surface and a flat slab. On a wavy slab the grinder exposes stone on the high spots and cream in the low spots. That patchy look is a common complaint on existing floors, and it is why a test patch is worth paying for.

Cost by sheen level and grit

Sheen is separate from exposure. You can have a cream floor at high gloss, or full aggregate at a satin finish. Sheen comes from the resin steps after the grind: each finer pad leaves a smoother surface that reflects more light.

The grit ladder: each step is another passMetal bondto 80–200 gritDensifierafter grinding400 resin400 grit800 resin800+ grit3,000 resin3,000 or burnishLevel 1 flathardens the pasteLevel 2 satinLevel 3Level 4gloss under 10gloss 5–25gloss over 35gloss over 50more passes → more labour → higher price per sq ft
Metal bond does the cutting. Resin pads do the polishing. Every step adds time.
Polish levels: ASCC CPC appearance chart (2-2024), typical final grit (ConcreteNetwork) and HomeGuide sheen prices
Level (ASCC name)ReflectionDOIGlossTypical final gritNearest HomeGuide sheen, per sq ft
1 Exposed/Flat (Ground)flat or matte0–9under 10below 100soft matte $3–6
2 Exposed/Satin (Honed)satin10–395–25400 resinlow sheen $4–8
3 Polishedblurred but readable40–69over 35800 or highermedium gloss $5–10
4 Highly Polishedsharp, near mirror; may need groutingover 70over 503,000 resin or burnisherhigh gloss $6–15

The ASCC chart defines levels by measured result, not by grit, and all four levels require haze under 12. That is the right way to specify a floor, because two crews with different pads can reach the same gloss by different routes. The grit column is ConcreteNetwork’s typical sequence. Pairing each level with a HomeGuide sheen price is CalcWall’s match by name, since HomeGuide does not cite the ASCC levels.

How much does each step add? Sources differ by a factor of ten, and they are measuring different things. Bob Vila (2022) says each extra level of polish adds $0.35–0.75 per sq ft. HomeAdvisor and This Old House say each extra grinding pass adds $3–5. A finer resin step on a floor that is already ground is quick. Another metal-bond pass to cut deeper is slow. Ask your contractor which one a price covers.

In the calculator, sheen is inside the tier price. If you want Level 4 on a light grind, expect to land near the top of the light range or above it. If you want a satin finish on full aggregate, you may come in near the bottom of the full range.

New slab vs polishing an existing floor

The biggest single choice is whether the concrete is already there. Polishing an existing floor is priced for grinding and polishing only. A new floor includes the concrete, placing and finishing it flat, then curing, grinding and sealing.

In the UK, Checkatrade gives both: £120–150 per m² for a new floor, with an average of £135, and about £50 per m² to polish an existing one. In the US, Airtasker gives $3–5 per sq ft for an existing floor. Bob Vila gives $15–30 per sq ft where a new slab or major work is needed, but that figure is from 2022.

A new slab gives the polisher more control. The mix, the stone and the flatness can be chosen with polishing in mind, so agree them with the polisher before the pour. The slab has to cure before grinding. The concrete curing time calculator shows how long that takes at your temperature.

An existing floor is cheaper but holds surprises. Old slabs were not poured to be seen. Expect patches, trowel marks, uneven stone and stains from old floor coverings. Those can be part of the look, but they can also be the reason a client is unhappy. If the floor is badly out of level, the self-leveling concrete calculator sizes an underlayment, though a polished finish then needs a product made to be polished.

Prep and repair costs: coatings, cracks and joints

Prep is where existing floors go over budget. None of these items is in the calculator’s tier price, so add them yourself. The table gives every dated figure CalcWall found. Where there is no figure, it says so.

Prep and repair add-ons (US unless shown, published estimates)
ItemPublished pricePublisher and date
Minor crack filling and patching$100–800 per jobHomeGuide, undated
Minor floor repairs$0.50–2 per sq ftBob Vila, Nov 2022
Total resurfacing of a damaged floor$4–10 per sq ftBob Vila, Nov 2022
Old floor covering removal$1.50–3.50 per sq ftThis Old House, Apr 2026
Extra grinding pass$3–5 per sq ftHomeAdvisor, undated; This Old House, Apr 2026
Basement with limited equipment access+10–30%HomeGuide, undated
Above-grade (upper floor) slab+$2–5 per sq ftBob Vila, Nov 2022
Rough prep grinding only (Germany)€5–30 per m²Hausjournal, Feb 2022
Coating, epoxy or glue removal before polishingno dated published price foundnone
Joint filling, per linear ftno dated published price foundnone

Old coatings and adhesive are the worst offenders. HomeGuide notes that old sealers or epoxy coatings must be stripped first, but gives no price. Thin paint comes off in the first metal-bond pass. Thick epoxy or carpet mastic clogs diamonds and can take several passes or a separate stripping step. Get this priced after a site visit, not from a guide.

Cracks show more on a polished floor, not less, because the surface around them gets brighter. Fillers can be colour-matched, but they rarely vanish. In warehouses, control joints are often filled with a semi-rigid filler so wheels do not chip the edges. In a home, many owners leave them open. Either way, it is a line item to ask about.

Densifier, dye and guard

A densifier is a liquid silicate that reacts with the cement paste and hardens the surface. It goes on after the coarse grind, so the finer resin steps polish hard paste instead of tearing soft paste. Sika’s data sheet for Sikafloor-956 LD, a lithium silicate (Feb 2020, version 01.04), says to grind to the chosen exposure ending with 80–200 grit tools, remove all dust, then apply. A second coat is optional.

Its coverage is 200–400 sq ft per gallon, or 4.9–9.8 m² per litre. So a 1,000 sq ft floor needs 1,000 ÷ 400 = 2.5 to 1,000 ÷ 200 = 5 gallons for one coat. Soft or old concrete sits at the thirsty end. A densifier is normally part of a mechanical polish price, so check that it is on the quote.

Dye and stain are the main colour options. HomeGuide says dye adds $1–3 per sq ft, and a single-colour stain costs $3–5, rising to $25 for complex patterns. This Old House gives dye at $1.50–3 and stain at $2–10. Bob Vila gives stain at $2–4, and up to $15 for multi-layer designs. If you came here for a stained concrete floor cost calculator, run the tier price, then add the dye or stain rate × area.

A guard is the thin protective coat applied at the end of many polish systems. The research found no dated stand-alone guard price. Where a source prices sealing, it is a full coat: Bob Vila gives $0.85–1.60 per sq ft for basic sealed concrete. For coverage on a sealer you apply yourself, the concrete sealer calculator works out litres or gallons per coat.

DIY polishing vs hiring a pro

DIY polishing is possible, but most rental grinders are built for surface prep, not a full polish. The Home Depot’s EDCO 10 in grinder weighs 191 lb, runs on a standard 110 V outlet and has a vacuum port. Its page lists rates by store only and warns that accessory fees may apply. One rental store’s page says grinding stones are sold separately, so ask what the diamonds will cost before you sign.

Grinder rental costs (published estimates; diamonds, pads and dust extractor extra)
RentalCostSource
Grinder rental, average job$460–1,280Bob Vila, Nov 2022
22 in dual-head grinder, 4 hours$85Nickell Rental, undated
Same, 24 hours$113Nickell Rental, undated
Same, 2 days (2 × $113)$226arithmetic
Same, 3 days (3 × $113)$339arithmetic
Same, 1 week$428Nickell Rental, undated

How many days for 500 or 1,000 sq ft? CalcWall found no published DIY figure. HomeGuide says pros take 2–4 days for homes up to 2,000 sq ft, with commercial machines and a trained crew. A first-timer on a smaller rental machine will be slower. From 4 days up, the weekly rate of $428 beats 4 × $113 = $452.

Now compare. A 500 sq ft floor at the medium tier is $2,000–5,000 from a contractor. Three days of rental is $339, before diamonds, pads, densifier, edging tools and a dust extractor. The saving can be real in a basement or garage where looks matter less. For a living room at high gloss, the risk of swirl marks and patchy exposure usually makes the pro the cheaper choice in the end.

Dry grinding concrete makes fine silica dust. Use a grinder with a vacuum port connected to a dust extractor rated for the job, wear a respirator, and keep others out of the room. Follow the rental store’s safety notes and your local workplace rules.

Polished concrete vs epoxy, sealed concrete and other floors

Polishing changes the concrete itself. Epoxy and sealers sit on top of it. That one difference explains most of the cost and wear trade-offs. A polished surface has nothing to peel. A coating can hide a stained or patched slab that would look poor polished.

Polished concrete vs other floors: installed cost by market (published estimates, own currency)
FloorPricePublisher and date
US polished concrete, basic finishes$3–12 per sq ftHomeGuide, undated
US epoxy flooring$4–10 per sq ftHomeGuide, undated
US concrete sealing$1–3 per sq ftHomeGuide, undated
US basic sealed concrete+$0.85–1.60 per sq ftBob Vila, Nov 2022
US vinyl / laminate$2–14 / $3–13 per sq ftThis Old House, Apr 2026
US hardwood / tile$6–25 / $15–20 per sq ftThis Old House, Apr 2026
Canada standard epoxy / basement epoxy$5–9 / $4–8 per sq ft (CAD)HomeStars, undated
Canada exposed aggregate or polished (outdoor context)$10–20 per sq ft (CAD)HomeStars Toronto, Aug 2026
Germany simple epoxy / commercial epoxy€30–50 / €80–120 per m²Hausjournal, Feb 2022
Germany concrete grinding (coarse and fine)€60–90 per m²Hausjournal, Feb 2022

Against epoxy, the US ranges overlap. HomeGuide puts epoxy at $4–10 and basic polished finishes at $3–12. A light polish on a good slab can come in under epoxy, and a full-aggregate, high-gloss polish usually comes in over it. HomeGuide says solid epoxy lasts 10–20 years, while water-based epoxy may need a new coat every 3–5 years. For coating quantities, use the epoxy calculator.

Against a plain sealer, polished concrete costs more up front. HomeGuide gives sealing at $1–3 per sq ft. This Old House suggests resealing every 3–5 years at $0.85–1.60 per sq ft. On 1,000 sq ft, that is $850–1,600 a time, or $850 ÷ 5 = $170 to $1,600 ÷ 3 = $533 a year.

Against tile and wood, polished concrete usually wins on price when the slab already exists. This Old House lists tile at $15–20 and hardwood at $6–25 per sq ft. Vinyl and laminate can be cheaper. Comfort is the trade: This Old House says concrete feels cold underfoot and is slippery when wet.

Polished concrete costs by country

The calculator uses the figures below as its defaults. Each stays in its own currency and unit. Some markets have one publisher only, and Canada has no direct figure at all. Where that is the case, the table says so rather than filling the gap.

Polished concrete installed prices by market and tier (published estimates)
MarketLightMediumFullExisting / new floorPublisher and date
United States$3–8 per sq ft (cream)$4–10 (salt and pepper)$6–12 (rock cut)existing $3–5HomeGuide, undated; Airtasker US, 3 Jun 2025 (existing)
United Kingdom£26 per m² (grind and seal)£40 (honed)£60 (mechanical polish)new £120–150, avg £135, + VATAirtasker UK, 3 Jun 2025; Checkatrade, Apr 2026 (new)
Canadano direct figure; HomeStars gives $10–20 per sq ft (CAD) for “exposed aggregate or polished finishes” in an outdoor guidenoneHomeStars Toronto, 21 Aug 2026
Australia$60–70 per m² (grind and seal)$80–90 (honed)$100–120 (mechanically polished)noneYellow Pages, updated May 2026
New Zealand$60–90 per m² + GST (indoor grind and seal / honed)none$80–130 + GST (mechanical polish)noneSuperior Renovations, Auckland, updated 24 Oct 2026
Germanynonenone€60–90 per m² (grinding, coarse and fine)noneHausjournal, updated 23 Feb 2022

United Kingdom: Checkatrade and Airtasker disagree

The two UK sources are far apart. Checkatrade (April 2026) gives £120–150 per m² for a new polished floor, poured, finished and sealed, and about £50 per m² to polish an existing one. Airtasker UK (June 2025) gives £26–60 per m² overall, with grind and seal at £26, honed at £40 and mechanical polish at £60.

Airtasker’s whole range sits close to Checkatrade’s existing-floor figure. The most likely reading is that Airtasker is pricing work on existing slabs, though its page does not say so. That is why the calculator uses Airtasker for the three tiers and Checkatrade only for the new-floor option. Checkatrade labels its prices + VAT. Airtasker does not state VAT.

Checkatrade’s room examples help with small jobs: about £2,700 for a 20 m² room, from £4,800 for 40 m² open plan, £760–3,426 for a garage and £153–455 for a bathroom. Its existing-floor figure of about £50 per m² is the calculator’s “Polish an existing floor” option for the UK, so 48 m² comes to £2,400.

Canada: only an indirect figure

CalcWall found no Canadian cost guide for polished interior floors. The only figure is from HomeStars Toronto (updated 21 August 2026): “exposed aggregate or polished finishes can range from $10 to $20 per square foot”. That sits in a guide to outdoor concrete work such as driveways and patios, so it is not a floor-polishing price. The calculator has no Canadian default and asks for your quote.

For comparison, HomeStars’ epoxy guide gives $5–9 per sq ft for standard epoxy and $4–8 for basements, both undated.

Australia, New Zealand and Germany

Australia. Yellow Pages’ polished-floor guide gives $60–120 per m², and the calculator uses its three tiers. The same publisher’s general concreting guide lists polished concrete at $100–300+ per m². Airtasker AU (June 2025) gives $50–100, with grind and seal at $50, honed at $75 and mechanical polish at $100. The higher Yellow Pages range may include the slab, but the page does not say so.

New Zealand. The only source is one Auckland contractor’s own price page, updated October 2026. It gives indoor grind and seal or honed at $60–90 per m² + GST, residential mechanical polish at $80–130, and outdoor grind and seal at $40–60. One contractor is not a market survey. The calculator files the indoor grind-and-seal / honed figure under light, so there is no separate medium price.

Germany. Hausjournal gives €60–90 per m² for grinding a concrete floor, coarse and fine, and €15–30 per m² for each extra gloss pass. The calculator files the €60–90 under full. Hausjournal’s Sichtestrich examples come to €147.02 per m² with a simple gloss grind and seal, and €226.43 with a high-gloss grind and a premium seal. Both pages date from 2022.

Worked examples

Each of these matches the calculator with its default prices. Enter the same sizes and finish to check.

US, 20 × 25 ft living area, medium (salt and pepper). 20 × 25 = 500 sq ft. HomeGuide gives $4–10, so the middle is (4 + 10) ÷ 2 = $7.00. Low 500 × $4 = $2,000. High 500 × $10 = $5,000. Middle $3,500, at $7.00 per sq ft.

US, 40 × 25 ft basement, existing floor. 40 × 25 = 1,000 sq ft. Airtasker US gives $3–5, middle $4.00. Range $3,000–5,000, middle $4,000. The calculator stops there. Outside it: poor access at +10–30% (HomeGuide) adds $400–1,200, dye at $1–3 adds $1,000–3,000, and minor crack repair is $100–800.

1,000 sq ft basement, existing slab: $7,250Polish existing slab: $4,0001,000 × $4Basement access: $800+20%Dye: $2,0001,000 × $2Crack repair: $450$450$0$7,250Mid-points of published ranges: Airtasker US and HomeGuide. Your quote will differ.
The basement example with mid-point add-ons: $4,000 + $800 + $2,000 + $450 = $7,250.

US, 24 × 24 ft garage, light (cream). 24 × 24 = 576 sq ft. HomeGuide gives $3–8, middle $5.50. Low 576 × $3 = $1,728. High 576 × $8 = $4,608. Middle $3,168. Used as a concrete garage floor cost calculator, it shows why a grind and seal is the usual budget choice for a garage.

UK, 6 × 8 m kitchen-diner, medium (honed) and new floor. 6 × 8 = 48 m². Airtasker UK gives £40 per m² as one figure: 48 × £40 = £1,920. Switch to new floor: Checkatrade’s £120–150 gives £5,760–7,200, middle 48 × £135 = £6,480, plus VAT.

Australia, 6 × 8 m, full (mechanically polished). 48 m² at Yellow Pages’ $100–120: low $4,800, high $5,760, middle 48 × $110 = $5,280. At the light tier, $60–70, the middle is 48 × $65 = $3,120.

Germany, 6 × 8 m, full. 48 m² at Hausjournal’s €60–90: middle 48 × €75 = €3,600, range €2,880–4,320. The calculator shows it in German format, 3.600,00 €. One extra gloss pass at €15–30 per m² adds €720–1,440, which the calculator does not include.

In New Zealand, the same 48 m² at the light tier is 48 × $75 = $3,600 + GST, with a range of $2,880–4,320. In Canada the tool shows no figure until you type a quoted rate.

If you are pouring new, the concrete cost calculator prices the ready-mix, short-load fees and labour. Add its total to a polishing price for a full new-floor budget.

Notes for pros

Quote depth and sheen. Write the ASCC CPC class (A, B or C) and level (1–4) on the quote. “Polished” on its own starts arguments.

Price passes, not levels. An extra metal-bond pass ($3–5 per sq ft) and an extra resin step ($0.35–0.75) are not the same job. Say which.

Test patch first. On an existing slab, grind a small area to the agreed class. The ASCC chart asks for a mock-up for approval.

Small rooms cost more. Set-up is fixed. Checkatrade’s UK examples fall from £135 per m² at 20 m² to £120 at 40 m².

Figures on this page are published estimates, not quotes. Each one comes with its publisher and the date shown on its page. Where a page gives no date, the tables say undated. Local labour rates, access and the slab itself decide the real price.

Sources

Where the numbers on this page come from. Everything else is plain geometry and unit conversion, which the calculator does with exact factors.

  • How much do polished concrete floors cost?, HomeGuide, undated, read Nov 2026. Used for: US basic finishes $3–12 per sq ft; cream $3–8, salt and pepper $4–10, rock cut / exposed aggregate $6–12 (the calculator’s US light, medium and full tiers); sheen prices soft matte $3–6, low sheen $4–8, medium gloss $5–10, high gloss $6–15; sealing $1–3; dye adds $1–3; single-colour stain $3–5 (to $25 for patterns); minor crack and patch repairs $100–800; basements with poor access 10–30% more; 2–4 days for homes up to 2,000 sq ft and 1–2 weeks for 5,000–10,000 sq ft
  • How Much Do Polished Concrete Floors Cost in 2025?, HomeAdvisor (Angi Inc.), undated (title says 2025), read Nov 2026. Used for: most jobs $2–16 per sq ft; simple single-layer design $2–6; each additional grinding pass $3–5 per sq ft
  • Polished Concrete Floor Cost, Bob Vila, published 22 Nov 2022, modified 30 Nov 2022. Used for: basic floor $2–8 per sq ft; each additional level of polish $0.35–0.75; basic sealed concrete $0.85–1.60; stain $2–4 (multi-layer up to $15); above-grade floors $2–5 extra; minor repairs $0.50–2 and resurfacing $4–10 per sq ft; new slab or major work $15–30; grinder rental $460–1,280
  • A Guide to Polished Concrete, This Old House, updated 04/01/2026. Used for: polished $3–15 per sq ft, simple polish $2–6; dye $1.50–3, stain $2–10, sealing $0.85–1.60, reseal every 3–5 years; extra grinding pass $3–5; old floor removal $1.50–3.50; labor about two-thirds of the budget; comparison table: vinyl $2–14, laminate $3–13, hardwood $6–25, tile $15–20 per sq ft; slippery when wet; feels cold underfoot
  • How much does polished concrete flooring cost?, Airtasker (US), last updated 3 Jun 2025. Used for: polishing an existing floor $3–5 per sq ft (the calculator’s US existing-floor option); cream $4–7, salt and pepper $3–8, full or exposed aggregate $7–15
  • How much does epoxy flooring cost?, HomeGuide, undated, read Nov 2026. Used for: US epoxy flooring $4–10 per sq ft installed; solid epoxy lasts 10–20 years, water-based may need a new coat every 3–5 years
  • Polished concrete floor cost guide, Checkatrade, updated April 2026. Used for: UK new polished floor £120–150 per m², average £135 (the calculator’s UK new-floor option); existing floor about £50 per m²; 20 m² room about £2,700; 40 m² open plan from £4,800; garage £760–3,426; bathroom £153–455; prices shown + VAT; no more slippery than tile or laminate; works with underfloor heating
  • Polished concrete floor cost, Airtasker (UK), last updated 3 Jun 2025. Used for: UK £26–60 per m² overall; grind and seal £26, honed £40, mechanical polish £60 (the calculator’s UK light, medium and full tiers)
  • Polished concrete floors cost guide [2024], Yellow Pages Australia, published 5 Apr 2025, updated May 2026. Used for: Australia $60–120 per m²; grind and seal $60–70, honed $80–90, mechanically polished $100–120 (the calculator’s AU tiers)
  • How much does concreting cost? [2024], Yellow Pages Australia, published 12 Feb 2025, updated May 2026. Used for: polished concrete $100–300+ per m² in its general finishes table
  • How much do polished concrete floors cost?, Airtasker (AU), last updated 25 Jun 2025. Used for: Australia $50–100 per m²; grind and seal $50, honed $75, mechanical polish $100
  • Polished Concrete Floors Auckland, Superior Renovations (Auckland contractor’s own price page), published 22 Jun 2026, updated 24 Oct 2026. Used for: NZ outdoor grind and seal $40–60, indoor grind and seal / honed $60–90, residential mechanical polish $80–130 per m² + GST
  • Kostenbeispiel: Betonboden schleifen, Hausjournal, published 18.09.2015, updated 23.02.2022. Used for: Germany coarse and fine grinding €60–90 per m² (the calculator’s German full tier); each extra gloss pass €15–30 per m²; rough prep grinding only €5–30 per m²
  • Kostenbeispiel: Sichtestrich, Hausjournal, 15 Jan 2022. Used for: exposed screed worked examples at €147.02 per m² (simple gloss grind and seal) and €226.43 per m² (high-gloss grind, premium seal)
  • Kostenbeispiel: Epoxidharz Bodenbeschichtung, Hausjournal, 19.02.2022. Used for: simple epoxy floor coating €30–50 per m², heavy-duty commercial epoxy €80–120 per m²
  • Concrete Contractor Costs in Toronto, HomeStars, updated 21/08/2026. Used for: the only Canadian figure found: exposed aggregate or polished finishes $10–20 per sq ft, in an outdoor concrete context
  • Epoxy Flooring Costs: Breaking Down Prices for Garages, Basements & More, HomeStars, undated, read Nov 2026. Used for: Canada standard epoxy $5–9 per sq ft, basement epoxy $4–8
  • Exposed/Polished Concrete Aggregate Exposure Chart, ASCC Concrete Polishing Council, 2-2024. Used for: Class A cream (85–95% cement fines), Class B salt and pepper (85–95% fine aggregate), Class C full aggregate (80–90%), judged in a 10 × 10 ft square, with a mock-up for approval
  • Exposed/Polished Concrete Appearance Chart, ASCC Concrete Polishing Council, 2-2024 (replaces the CPAA chart). Used for: Levels 1–4: flat (DOI 0–9, gloss under 10), satin (DOI 10–39, gloss 5–25), polished (DOI 40–69, gloss over 35), highly polished (DOI over 70, gloss over 50, may need grouting); haze under 12 at all levels
  • How to Use CPC Classes and Levels to Specify Polished Concrete, American Society of Concrete Contractors (Ryan Klacking), 15 Jul 2024. Used for: the CPC system of three aggregate classes and four sheen levels
  • Polished Concrete Levels, ConcreteNetwork (Anne Balogh), undated, read Nov 2026. Used for: typical final grit: Level 1 below 100, Level 2 400, Level 3 800 or higher, Level 4 3,000 resin or a burnisher; the older four-class exposure scheme
  • Sikafloor-956 LD product data sheet, Sika USA, Feb 2020, version 01.04. Used for: lithium silicate densifier, 200–400 sq ft per gallon (4.9–9.8 m² per litre), applied after grinding that ends at 80–200 grit, optional second coat
  • Concrete Grinder, Dual Head Electric, Nickell Rental, undated (copyright 2011–2016), read Nov 2026. Used for: one store’s rates for a 22 in dual-head grinder: $85 for 4 hours, $113 for 24 hours, $428 a week
  • EDCO 10 in. Concrete Grinder with Disc rental, The Home Depot, read Nov 2026. Used for: 191 lb grinder on a standard 110 V outlet with a vacuum port; rates by store only; accessory fees may apply

Frequently asked questions

How much does a polished concrete floor cost per square foot?

HomeGuide (undated, read Nov 2026) gives $3–12 per sq ft for basic finishes in the US. HomeAdvisor gives $2–16, and This Old House (updated Apr 2026) $3–15. The cheapest jobs are a light cream grind on a sound existing slab. The dearest are full aggregate exposure at high gloss, with dye and repairs.

How much does it cost to polish a concrete basement floor?

At Airtasker’s $3–5 per sq ft for an existing floor, a 1,000 sq ft basement is $3,000–5,000, with $4,000 at the midpoint. HomeGuide says poor equipment access can add 10–30%. With dye and a little crack repair, the mid-point budget in our worked example is $7,250. Enter your size in the calculator and pick the existing-floor option.

How much does polished concrete cost per square metre in the UK or Australia?

UK: Checkatrade (Apr 2026) gives £120–150 per m² for a new floor and about £50 to polish an existing one, plus VAT. Airtasker UK (Jun 2025) gives £26–60. Australia: Yellow Pages (May 2026) gives $60–120 per m², and Airtasker AU $50–100. Each figure stays in its own currency.

Is polished concrete cheaper than tile or wood?

Usually, if the slab is already there. This Old House (Apr 2026) lists tile at $15–20 and hardwood at $6–25 per sq ft, against $3–15 for polished concrete. Vinyl ($2–14) and laminate ($3–13) can come in lower. On a new slab you also pay for the concrete, which changes the sum.

Is polished concrete cheaper than epoxy?

The ranges overlap. HomeGuide gives epoxy at $4–10 per sq ft and polished concrete at $3–12 for basic finishes. A light grind on a good slab can beat epoxy. A full-aggregate, high-gloss polish usually costs more. Epoxy covers stains and patches; polishing shows them.

What is the difference between cream, salt-and-pepper and exposed aggregate?

How deep the grinder cuts. Cream takes off a thin skin, so 85–95% of the surface is cement fines. Salt and pepper cuts to the sand, 85–95% fine aggregate. Full exposure slices through the stone, 80–90% coarse aggregate. Those shares come from the ASCC Concrete Polishing Council chart (2-2024).

What grit gives a high-gloss polish?

ConcreteNetwork gives 3,000-grit resin pads, or a high-speed burnisher, for Level 4. The ASCC chart defines Level 4 by its result: gloss over 50 and a distinctness of image over 70, a near-mirror reflection. Level 3 stops at about 800 grit and Level 2 at 400.

Can my existing concrete floor be polished?

Most sound slabs can. Cracks, old coatings, glue and soft or dusty concrete add prep. Ask for a test patch first, because the stone and colour in an old slab are unknown until it is ground. Airtasker US gives $3–5 per sq ft for polishing an existing floor and Checkatrade about £50 per m².

How much does it cost to remove old coatings or glue first?

CalcWall found no dated per-sq-ft price for removing coatings or adhesive before polishing. This Old House gives $1.50–3.50 per sq ft to remove an old floor covering, and Hausjournal €5–30 per m² for rough prep grinding. Thick mastic can take extra metal-bond passes, so get it priced on site.

What does a densifier do, and is it needed?

A densifier is a silicate liquid that soaks into the ground surface and hardens the paste, so the later resin steps can polish it. Sika’s lithium silicate data sheet says to apply it after grinding that ends at 80–200 grit, at 200–400 sq ft per gallon. Most mechanical polish systems include one.

Can polished concrete be coloured or dyed?

Yes. HomeGuide says dye adds $1–3 per sq ft, and single-colour stain costs $3–5. This Old House gives dye at $1.50–3 and stain at $2–10. On a polished floor, dye usually goes on during the polishing steps rather than at the end. Colour in an old slab is never quite even, so test it.

Can I polish concrete myself, and what does rental cost?

You can, but it is heavy, slow work. Bob Vila (Nov 2022) puts grinder rental at $460–1,280. One US store, Nickell Rental, lists a dual-head grinder at $113 a day or $428 a week (undated). Diamonds, pads, a dust extractor and densifier are extra. A DIY result is usually a grind-and-seal, not a high gloss.

How long does polishing a floor take?

HomeGuide says most home projects take 2–4 days for up to 2,000 sq ft, and commercial spaces of 5,000–10,000 sq ft take 1–2 weeks. A new slab must cure first, so use the concrete curing time calculator to plan that wait.

Is polished concrete slippery?

Checkatrade says it is generally no more slippery than tile or laminate. This Old House warns that it is slippery when wet. For kitchens, bathrooms and entries, ask for a lower sheen or an anti-slip treatment, and keep mats at the doors.

How much maintenance does a polished concrete floor need?

Sweep or dust-mop, then damp-mop with a pH-neutral cleaner (This Old House). It suggests resealing every 3–5 years at $0.85–1.60 per sq ft. On 1,000 sq ft that is $850–1,600 a time, or about $170–533 a year.

Does polished concrete work with underfloor heating?

Yes. Checkatrade says the two work well together and are often installed at the same time, though the heating adds to the budget. With a new slab, the pipes sit in the concrete, so the installer must know how deep the grinding will go before the pour.

Why do polished concrete quotes vary so much?

The tier and the slab drive most of it. Exposure depth, the number of resin steps, repairs and access all change the hours. Price guides also disagree. In the UK, Checkatrade’s new-floor price is £120–150 per m², while Airtasker’s top figure is £60. In Australia, two Yellow Pages guides give different ranges.

Is this polished concrete floor cost calculator free to use online?

Yes. The CalcWall Polished Concrete Floor Cost Calculator is completely free and works online in any browser, on a phone, tablet or computer. There is nothing to download and no account to create, and the math runs right in your browser, so results appear as you type.

All Concrete calculators →

Used in these projects:Flooring calculatorsCost estimators calculators

Last updated ·How we calculate · Results are estimates; confirm quantities with your supplier.