Quick answer: a deck’s material list comes from three sums. Deck boards: rows = width (in) ÷ (board + gap), rounded up. Joists: length (in) ÷ spacing + 1. Footing concrete: π × (diameter ÷ 2)² × depth per post, about 0.60 cu ft per 80 lb bag. An attached 16 × 12 ft deck needs 28 boards of 16 ft, 13 joists and 16 bags for 4 footings.
How the planner works
Most deck guides make you visit five calculators and copy numbers between them. This page runs those calculators for you, from one set of inputs, and keeps their results in step. Nothing here is a new formula: each line of the list says which calculator it comes from, and a test on every release checks that the totals here equal the single calculators’ results.
| Part of the list | Worked out by | Rule |
|---|---|---|
| Deck boards, joists, ledger, rim, beam boards, posts | Deck Calculator | Rows = ⌈W × 12 ÷ (board + gap)⌉; joists = ⌈L × 12 ÷ spacing⌉ + 1; joist size from the 2021 IRC span table (40 psf) |
| Footing concrete | Deck Calculator | π × (d ÷ 2)² × depth × posts; 0.60 cu ft per 80 lb bag |
| Screws or clips, hangers, ties, post bases and caps, ledger fasteners | Deck Calculator | 2 screws per board per joist; 1 hanger per joist on a ledger |
| Railing posts, balusters, rails | Deck Calculator | Open sides minus the stair opening; a post every 6 ft plus corners; balusters at 5 in |
| Stair risers and checks | Concrete Step Calculator checks | Risers = ⌈rise ÷ 7¾ in⌉; treads = risers − 1 |
| Stain | Deck Stain Calculator | (deck + treads + railing × 2) × 1.10 × coats ÷ coverage, rounded up |
Three things are this planner’s own choices, and each is shown on the page: stair stringers are spaced like the joists, each tread is made of whole deck boards adding up to at least 10 in, and a stair with 4 or more risers gets a handrail on both sides. The railing is counted as 3 ft high for the stain area. Composite and PVC boards are not stained, so with those the stain line covers only a wood railing.
Worked example: a 16 × 12 ft attached deck
- Boards: 144 in ÷ (5.5 + 0.1875) = 25.3, so 26 rows. One 16 ft board covers a row: 26 boards + 5% = 27.3, so 28 boards.
- Joists: 192 in ÷ 16 = 12, + 1 = 13. The span is 12 ft; a Southern pine 2×8 at 16 in reaches 11 ft 10 in, so the planner picks 2×10 (14 ft).
- Posts and footings: 16 ÷ 6 = 2.67, rounded up to 3 gaps, so 4 posts. Each 12 × 36 in footing is π × 0.5² × 3 = 2.36 cu ft; four are 9.42 cu ft ÷ 0.60 = 15.7, so 16 bags.
- Stairs: 36 in ÷ 7.75 = 4.6, so 5 risers of 7.2 in and 4 treads of two boards (11.19 in). 4 stringers at 16 in across 4 ft.
- Screws: 26 rows × 13 joists × 2 = 676 on the deck, + 4 treads × 2 boards × 4 stringers × 2 = 64 on the stairs: 740.
- Stain: deck 192 sq ft + treads 14.9 + railing (36 + 9.6 ft) × 3 ft × 2 = 273.4, so 480.3 sq ft; × 1.10 × 2 coats ÷ 250 = 4.2, so 5 gallons.
What the planner does not do
- It is not a structural design and does not check your deck against any code. It keeps the Deck Calculator’s joist span warnings, but beams, ledger fastening, footing size for your soil, guards and stair stringer spans are for you and your building department.
- It works in US units only, like the Deck Calculator.
- It has no built-in prices: CalcWall has no dated, sourced prices for lumber or hardware, so you type in your own.
- Rectangular decks only, without a cantilever. For an overhang past the beam use the Deck Calculator, which explains the IRC limit.
Frequently asked questions
How much material do I need for a 16 × 12 deck?
For an attached 16 × 12 ft deck 3 ft high, with 5½ in wood boards, joists 16 in on center and a 4 ft stair: 28 deck boards 16 ft long, 13 joists (2×10 × 12 ft in Southern pine), 4 posts on 4 footings that take 16 bags of 80 lb concrete (12 in round, 36 in deep), about 740 deck screws, 13 joist hangers, 4 stair stringers and about 5 gallons of stain for two coats including the railing. Enter your own sizes for your own list.
Where do the quantities come from?
From the same code as the single calculators. The deck boards, framing, posts, footing concrete, screws, hangers and railing come from the Deck Calculator, the stair risers and checks from the Concrete Step Calculator, and the stain from the Deck Stain Calculator. A test checks that this page gives exactly the same numbers as those calculators for three deck sizes.
Why are the prices empty?
Lumber, concrete and hardware prices change by store, region and week, and CalcWall has no dated, sourced prices for them. Rather than guess, the planner leaves every price for you to type in from your store’s website or a quote. The budget adds up only the lines you have priced and tells you how many are still empty.
Can I build a deck in a weekend?
Rarely from start to finish. The footings need to cure before the posts take load, and new wood is best left to weather before staining. That is why the plan spreads the work over two weekends and a later staining day. A small, low deck with few footings is the closest you get to one weekend.
Do I need a permit for a deck?
Most places in the US need a permit for an attached deck, and many for any deck above a set height or size. Footings are often inspected before you pour. Ask your building department before you buy anything; it also sets the footing depth for your frost line.
Does this planner check my deck against the building code?
No. It runs the Deck Calculator’s joist span guide from the 2021 IRC deck table and shows its warnings, and it checks stair risers and treads the way the Concrete Step Calculator does. It does not size beams, ledger fastening, footings for your soil, guards or cantilevers, and your local code may differ. Your building department has the final word.
Is the share link private?
The link holds your sizes and prices in the address itself; nothing is saved on a server. Anyone you send it to sees the same plan. The QR code is drawn in your browser from that same link.
How many bags of concrete do deck footings need?
Each round footing is π × (diameter ÷ 2)² × depth. A 12 in footing 36 in deep is 0.785 × 3 = 2.36 cu ft, so about 4 bags of 80 lb concrete (0.60 cu ft each). Multiply by the number of posts, then round up.
Is this planner free?
Yes. It is free, needs no account and works on your phone. Everything is worked out in your browser.
Sources
Where the numbers on this page come from. Everything else is plain geometry and unit conversion, which the calculator does with exact factors.
- 2021 International Residential Code, Table R507.6 (deck joist spans), International Code Council, 2021, read on ICC Digital Codes 10 Nov 2026. Used for: the joist span check and size pick of the Deck Calculator, which this planner runs unchanged (40 psf live load rows, No. 2 grade)
- IRC Code Handout #437: Treads & Risers, City of Boise Building Division, dated 02/2022 (the handout does not name the IRC edition). Used for: the 7¾ in maximum riser and 10 in minimum tread that the Concrete Step Calculator checks and this planner reuses for the deck stairs
- 2018 Residential Stair Guide, Town of Timnath, Colorado, based on the 2018 IRC; file dated March 2022. Used for: a handrail at four or more risers, which is when the planner adds a stair handrail
- QUIKRETE Concrete Mix No. 1101: product data sheet, The QUIKRETE Companies. Used for: about 0.60 cu ft from an 80 lb bag, used by the Deck Calculator to turn footing concrete into bags
- Finishes for Wood Decks, USDA Forest Service, Forest Products Laboratory (M. Knaebe), revised July 2013. Used for: letting new wood weather 2 to 3 months before a semitransparent stain, which sets the last step of the plan
- Selection and Application of Exterior Finishes for Wood (NCR-135), Purdue University Cooperative Extension Service, rev. 3/86. Used for: semitransparent stain coverage of about 300–400 sq ft per gallon on smooth wood and 150–200 on rough wood, the range behind the Deck Stain Calculator’s 250 sq ft example
- PS 20-25 American Softwood Lumber Standard, National Institute of Standards and Technology, January 2025. Used for: dressed sizes: 5½ in for a nominal 6 in deck board and 3½ in for a 2×4
- qrcode-generator (npm package, MIT licence), Kazuhiko Arase, version 2.0.4. Used for: drawing the QR code in your browser; it is bundled with the page, so the link never goes to a QR service
Last checked 17 Nov 2026. The figures above come from the calculators named in the table; their own pages list every source in full.
Every deck calculator
A deck needs three things worked out: the framing and boards, the concrete footings that hold it up, and the finish that protects it. These calculators cover each part, from the first post hole to the last coat of stain.
Which calculator to use first
Size the deck and its boards first, then the footings (Sonotube or post-hole concrete), then any concrete steps at the bottom, and finally the stain once the wood is dry.
- Deck Calculator: Decking boards, joists, beams, posts, screws and cost.
- Lumber Calculator: Cut-list planner: boards to buy and the least-waste length.
- Board Foot Calculator: Board feet and cost for a whole cut list.
- Sonotube Calculator: Bags of concrete for round form tubes and piers.
- Post Hole Concrete Calculator: Bags per post with the post taken out, for a whole fence line.
- Concrete Footing Calculator: Footer yards and bags, with corners taken off, plus pads and piers.
- Concrete Step Calculator: Concrete for steps and landings, with riser and tread checks.
- Deck Stain Calculator: Gallons or litres of deck stain for any number of coats.
- Miter Angle Calculator: Miter saw setting for frames and corners of any angle.
More projects
Plan another project:DrivewayPatio & walkwayFoundation & footingsLawn & gardenShed & outbuildingFlooringWalls & panelingCost estimators